Stable high-nickel austenitic steel produced by electron beam additive manufacturing using dual wire-feed system

被引：8
|
作者：
Moskvina, V. A. [1 ]
Melnikov, E. V. [1 ]
Astafurov, S. V. [1 ]
Panchenko, M. Yu. [1 ]
Reunova, K. A. [1 ]
Kolubaev, E. A. [1 ]
Astafurova, E. G. [1 ]
机构：
[1] RAS, Inst Strength Phys & Mat Sci SB, 2-4 Akad Skii Ave, Tomsk 634055, Russia
来源：
MATERIALS LETTERS | 2021年 / 305卷
关键词：
Stainless steel; NiCr alloy; Additive manufacturing; Austenite; Microstructure; STAINLESS-STEELS;
D O I：
10.1016/j.matlet.2021.130863
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Phase composition, microstructure, tensile properties and fracture mechanism of the high-nickel austenitic steel produced by a dual wire-feed electron beam additive manufacturing were studied. The joint using of NiCr-alloy and 321-type stainless steel wires in additive manufacturing process assists the formation a fully austenitic structure in as-built billet. Its microstructure is stable against deformation-induced gamma -* alpha' martensitic transformation due to the 5-7 wt.% increase of nickel concentration relative to the initial steel wire composition. The high-nickel steel possesses high ductility (6 approximate to 54%) and plastic flow behavior similar to the conventional cast 321-type steel subjected to a solid-solution treatment.
引用
收藏
页数：4
相关论文
共 50 条
  • [1] THE EFFECT OF NIOBIUM ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AUSTENITIC CrNi STEEL PRODUCED BY WIRE-FEED ELECTRON BEAM ADDITIVE MANUFACTURING
    Panchenko, Marina Yu
    Astafurova, Elena G.
    Moskvina, Valentina A.
    Maier, Galina G.
    Astafurov, Sergey, V
    Melnikov, Evgeny, V
    Reunova, Kseniya A.
    Rubtsov, Valery E.
    Kolubaev, Evgeny A.
    NANOSCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL, 2020, 11 (02) : 109 - 118
  • [2] Microstructure and mechanical properties of Nb-alloyed austenitic CrNi steel fabricated by wire-feed electron beam additive manufacturing
    Panchenko, Marina Yu.
    Maier, Galina G.
    Moskvina, Valentina A.
    V. Astafurov, Sergey
    V. Melnikov, Evgenii
    Reunova, Kseniya A.
    Kolubaev, Evgenii A.
    Astafurova, Elena G.
    MATERIALS CHARACTERIZATION, 2022, 190
  • [3] Stabilization of austenitic structure in transition zone of "austenitic stainless steel/NiCr alloy" joint fabricated by wire-feed electron beam melting
    Moskvina, V. A.
    Melnikov, E., V
    Panchenko, M. Yu
    Maier, G. G.
    Reunova, K. A.
    Astafurov, S., V
    Kolubaev, E. A.
    Astafurova, E. G.
    MATERIALS LETTERS, 2020, 277 (277)
  • [4] An in-situ monitoring system for electron beam wire-feed additive manufacturing
    Guo, Jiaqi
    Huang, Anguo
    Hu, Renzhi
    Xu, Haiying
    Yang, Guang
    Pang, Shengyong
    SENSORS AND ACTUATORS A-PHYSICAL, 2020, 307
  • [5] Characterization of a Bimetallic Multilayered Composite "Stainless Steel/Copper" Fabricated with Wire-Feed Electron Beam Additive Manufacturing
    Osipovich, Kseniya
    Vorontsov, Andrey
    Chumaevskii, Andrey
    Gurianov, Denis
    Shamarin, Nikolai
    Savchenko, Nikolai
    Kolubaev, Evgeny
    METALS, 2021, 11 (08)
  • [6] The Features of Structure Formation in Chromium-Nickel Steel Manufactured by a Wire-Feed Electron Beam Additive Process
    Kolubaev, A. V.
    Tarasov, S. Yu.
    Filippov, A. V.
    Denisova, Yu. A.
    Kolubaev, E. A.
    Potekaev, A. I.
    RUSSIAN PHYSICS JOURNAL, 2018, 61 (08) : 1491 - 1498
  • [7] The Features of Structure Formation in Chromium-Nickel Steel Manufactured by a Wire-Feed Electron Beam Additive Process
    A. V. Kolubaev
    S. Yu. Tarasov
    A. V. Filippov
    Yu. A. Denisova
    E. A. Kolubaev
    A. I. Potekaev
    Russian Physics Journal, 2018, 61 : 1491 - 1498
  • [8] Anisotropy of the tensile properties in austenitic stainless steel obtained by wire-feed electron beam additive growth
    Melnikov, E., V
    Astafurova, E. G.
    Astafurov, S., V
    Maier, G. G.
    Moskvi, V. A.
    Panchenko, M. Yu
    Fortuna, S., V
    Rubtsov, V. E.
    Kolubaev, E. A.
    LETTERS ON MATERIALS, 2019, 9 (04): : 460 - 464
  • [9] Gradient transition zone structure in "steel-copper" sample produced by double wire-feed electron beam additive manufacturing
    Osipovich, Kseniya S.
    Astafurova, Elena G.
    Chumaevskii, Andrey, V
    Kalashnikov, Kirill N.
    Astafurov, Sergey, V
    Maier, Galina G.
    Melnikov, Evgenii, V
    Moskvina, Valentina A.
    Panchenko, Marina Yu
    Tarasov, Sergey Yu
    Rubtsov, Valery E.
    Kolubaev, Evgeny A.
    JOURNAL OF MATERIALS SCIENCE, 2020, 55 (22) : 9258 - 9272
  • [10] A comparison of wire-feed additive manufacturing and hybrid additive/ subtractive manufacturing of high nitrogen steel
    Qian, Meixia
    Song, Shida
    Yang, Ziwei
    Guo, Yiming
    Wang, Kehong
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 : 4092 - 4104
12345