The effect of annealing temperature on the physical properties of Cu2O thin film deposited by SILAR method

被引:22
|
作者
Ozaslan, D. [1 ]
Erken, O. [2 ]
Gunes, M. [3 ]
Gumus, C. [1 ]
机构
[1] Univ Cukurova, Phys Dept, TR-01330 Adana, Turkey
[2] Adiyaman Univ, Fac Sci & Letters, Dept Phys, TR-02040 Adiyaman, Turkey
[3] Adana Alparslan Turkes Sci & Technol Univ, Fac Engn, Dept Mat Engn, TR-01250 Adana, Turkey
关键词
Cu2O; Annealing; CuO; SILAR; XRD; FE-SEM; SOLAR-CELL; CUO; LAYER; MORPHOLOGY; DENSITY;
D O I
10.1016/j.physb.2019.411922
中图分类号
O469 [凝聚态物理学];
学科分类号
070205 ;
摘要
Cu2O film was deposited on a glass substrate at 70 degrees C by the SILAR (Successive Ionic Layer Adsorption and Reaction) method. The Cu2O film was annealed in an air atmosphere at 100 degrees C, 300 degrees C, and 500 degrees C temperatures for 1 h and the effect of the annealing temperature on the physical properties was investigated. The phase-transition temperature that corresponds to the transformation from Cu2O to CuO was occurred at temperature of approximately 300 degrees C with annealing process. The energy band gap (E-g) was reduced from 2.57 eV to 1.91 eV with the increasing annealing temperature. Hall measurement revealed that the film showed p-type conductivity and the resistivity (rho) of Cu2O deposited at 70 degrees C and annealed 100 degrees C were calculated as 6.12 x 10(4) and 7.44 x 10(3 )Omega cm, respectively, while the film annealed at 300 degrees C and 500 degrees C the resistivity of CuO was found to be 8.23 x 10(3) and 5.11 x 10(2) Omega em, respectively.
引用
收藏
页数:8
相关论文
共 50 条
  • [31] Supercapacitor properties of Cu2O/Cu(OH)2 composite thin films deposited on nickel foam using pulse reverse potential electrodeposition
    Sarkar, Angshuman
    Taguessong, Berti Chilton
    Chen, X-Grant
    Sarkar, Dilip K.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2024, 35 (29)
  • [32] Laser Irradiation and Temperature Annealing of CuO-Cu2O Complex Thin Films
    Saied, E. A.
    Ismahil, M. M.
    Hassan, Y. M.
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2020, 45 (06) : 4921 - 4927
  • [33] Thin film deposition of Cu2O and application for solar cells
    Akimoto, K.
    Ishizuka, S.
    Yanagita, M.
    Nawa, Y.
    Paul, Goutam K.
    Sakurai, T.
    SOLAR ENERGY, 2006, 80 (06) : 715 - 722
  • [34] H2O2 Treatment of Electrochemically Deposited Cu2O Thin Films for Enhancing Optical Absorption
    Song, Ying
    Ichimura, Masaya
    INTERNATIONAL JOURNAL OF PHOTOENERGY, 2013, 2013
  • [35] Mechanical Properties of Cu2O Thin Films by Nanoindentation
    Jian, Sheng-Rui
    Chen, Guo-Ju
    Hsu, Wei-Min
    MATERIALS, 2013, 6 (10): : 4505 - 4513
  • [36] Role of precursor material and annealing ambience on the physical properties of SILAR deposited ZnO films
    Ravichandran, K.
    Rajkumar, P. V.
    Sakthivel, B.
    Swarninathan, K.
    Chinnappa, L.
    CERAMICS INTERNATIONAL, 2014, 40 (08) : 12375 - 12382
  • [37] Controlled growth of Cu2O thin films by electrodeposition approach
    Hossain, Md. Anower
    Al-Gaashani, Rashad
    Hamoudi, Hicham
    Al Marri, Mohammed J.
    Hussein, Ibnelwaleed A.
    Belaidi, Abdelhak
    Merzougui, Belabbes A.
    Alharbi, Fahhad H.
    Tabet, Nouar
    MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2017, 63 : 203 - 211
  • [38] Annealing and light effect on optical and electrical properties of ZnS thin films grown with the SILAR method
    Ates, Aytunc
    Yildirim, M. Ali
    Kundakci, Mutlu
    Astam, Aykut
    MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2007, 10 (06) : 281 - 286
  • [39] Investigation of the effect of anodization time and annealing temperature on the physical properties of ZrO2 thin film on a Si substrate
    Goh, Kian Heng
    Lee, Hui Jing
    Lau, Sze Kuan
    Teh, Pei Chiew
    Ramesh, S.
    Tan, Chou Yong
    Wong, Yew Hoong
    MATERIALS RESEARCH EXPRESS, 2017, 4 (08):
  • [40] Preparation of Eu-Doped Cu2O Thin Films Using Different Concentrations by SILAR and Their Heterojunction Property with ZnO
    Soundaram, N.
    Chandramohan, R.
    Prabu, R. David
    Valanarasu, S.
    Jeyadheepan, K.
    Kathalingam, A.
    Hamdy, Mohamed S.
    Alhanash, Abdullah M.
    Al-Namshah, K. S.
    JOURNAL OF ELECTRONIC MATERIALS, 2019, 48 (07) : 4138 - 4147