Effect of welding parameters on microstructure and mechanical properties of friction stir welded joints of AA7039 aluminum alloy

被引：144

作者：

Sharma, Chaitanya ^{[1
]}

Dwivedi, Dheerendra Kumar ^{[1
]}

Kumar, Pradeep ^{[1
]}

机构：

[1] IIT Roorkee, Mech & Ind Engn Dept, Roorkee 247667, Uttarkhand, India

来源：

MATERIALS & DESIGN | 2012年 / 36卷

关键词：

Welding; Mechanical; Fractography; FATIGUE; DEFECT;

D O I：

10.1016/j.matdes.2011.10.054

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A high strength Al-Zn-Mg alloy AA7039 was friction stir welded by varying welding and rotary speed of the tool in order to investigate the effect of varying welding parameters on microstructure and mechanical properties. The friction stir welding (FSW) process parameters have great influence on heat input per unit length of weld, hence on temperature profile which in turn governs the microstructure and mechanical properties of welded joints. There exits an optimum combination of welding and rotary speed to produce a sound and defect free joint with microstructure that yields maximum mechanical properties. The mechanical properties increase with decreasing welding speed/increasing rotary speed i.e. with increasing heat input per unit length of welded joint. The high heat input joints fractured from heat affected zone (HAZ) adjacent to thermo-mechanically affected zone (TMAZ) on advancing side while low heat input joints fractured from weld nugget along zigzag line on advancing side. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：379 / 390

页数：12

共 32 条

[1]

[Anonymous], 2009, E8E8M09 ASTM INT

[2] Theoretical and experimental investigation into friction stir welding of AA 5086 [J].

Aval, H. Jamshidi ;

Serajzadeh, S. ;

Kokabi, A. H. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 52 (5-8) :531-544

[3] Relationship between base metal properties and friction stir welding process parameters [J].

Balasubramanian, V. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 480 (1-2) :397-403

[4] Effect of welding parameters on mechanical and micro structural properties of AA6056 joints produced by Friction Stir Welding [J].

Cavaliere, P. ;

Campanile, G. ;

Panella, F. ;

Squillace, A. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 180 (1-3) :263-270

[5]

Colligan K, 1999, WELD J, V78, p229S

[6]

Colligan KJ, 2004, FRICTIONS STIR WELDI

[7] Experimental defect analysis and force prediction simulation of high weld pitch friction stir welding [J].

Crawford, R. ;

Cook, G. E. ;

Strauss, A. M. ;

Hartman, D. A. ;

Stremler, M. A. .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2006, 11 (06) :657-665

[8] The influence of zigzag-curve defect on the fatigue properties of friction stir welds in 7075-T6 Al alloy [J].

Di, Shusheng ;

Yang, Xinqi ;

Fang, Dapeng ;

Luan, Guohong .

MATERIALS CHEMISTRY AND PHYSICS, 2007, 104 (2-3) :244-248

[9] Flow patterns during friction stir welding [J].

Guerra, A ;

Schmidt, C ;

McClure, JC ;

Murr, LE ;

Nunes, AC .

MATERIALS CHARACTERIZATION, 2002, 49 (02) :95-101

[10] Effect of welding parameters on nugget zone microstructure and properties in high strength aluminium alloy friction stir welds [J].

Hassan, KAA ;

Prangnell, PB ;

Norman, AF ;

Price, DA ;

Williams, SW .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2003, 8 (04) :257-268

← 1 2 3 4 →