Effect of second phase particles topology on the onset temperature of abnormal grain growth in Fe-3%Si steels

被引:0
|
作者
Stoyka, V. [1 ]
Kovac, F. [1 ]
Sidor, Y. [1 ]
机构
[1] Slovak Acad Sci, Inst Mat Res, Kosice, Slovakia
来源
METALURGIJA | 2008年 / 47卷 / 01期
关键词
second phase particles; abnormal grain growth; coercive force; electrical steel;
D O I
暂无
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The relations between regimes of dynamic annealing, state of secondary particles system and the onset temperature of abnormal grain growth are investigated. Two distinguish types of Fe-3%Si grain-oriented steels, after one and two stage cold rolling, were studied. The second phase particles remain unaffected in first type of steel during the heat treatment. Vice versa, the increased density of second phases was observed after annealing in the second type of the investigated materials. It is shown that start/onset of abnormal grain growth strongly depends on both volume fraction of second phase particles and annealing temperature. Texture and magnetic properties of the investigated samples are investigated within the current study.
引用
收藏
页码:37 / 41
页数:5
相关论文
共 50 条
  • [1] Phase-Field Simulation on the Effect of Second-Phase Particles on Abnormal Growth of Goss Grains in Fe-3%Si Steels
    Wang, Mingtao
    Xu, Yongkai
    Hu, Jinlong
    Fang, Feng
    Jin, Jianfeng
    Jia, Tao
    Peng, Qing
    NANOMATERIALS, 2022, 12 (23)
  • [2] Influence of neighbourhood on abnormal Goss grain growth in Fe-3% Si steels: Formation of island grains in the large growing grain
    Maazi, N.
    Rouag, N.
    Etter, A. L.
    Penelle, R.
    Baudin, T.
    SCRIPTA MATERIALIA, 2006, 55 (07) : 641 - 644
  • [3] Monte Carlo study on abnormal growth of Goss grains in Fe-3%Si steel induced by second-phase particles
    Xin, Dong-qun
    He, Cheng-xu
    Gong, Xue-hai
    Wang, Hao
    Meng, Li
    Ma, Guang
    Hou, Peng-fei
    Zhang, Wen-kang
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2016, 23 (12) : 1397 - 1403
  • [4] Monte Carlo study on abnormal growth of Goss grains in Fe-3%Si steel induced by second-phase particles
    Dong-qun Xin
    Cheng-xu He
    Xue-hai Gong
    Hao Wang
    Li Meng
    Guang Ma
    Peng-fei Hou
    Wen-kang Zhang
    International Journal of Minerals Metallurgy and Materials, 2016, 23 (12) : 1397 - 1403
  • [5] Monte Carlo study on abnormal growth of Goss grains in Fe-3%Si steel induced by second-phase particles
    Dong-qun Xin
    Cheng-xu He
    Xue-hai Gong
    Hao Wang
    Li Meng
    Guang Ma
    Peng-fei Hou
    Wen-kang Zhang
    International Journal of Minerals, Metallurgy, and Materials, 2016, 23 : 1397 - 1403
  • [6] Evolution of the texture on primary recrystallization and grain growth in Fe-3%Si steels
    Han, Kyu-Seok
    Park, Jong-Tae
    Kim, Jae-Kwan
    Szpunar, Jerzy A.
    RECRYSTALLIZATION AND GRAIN GROWTH III, PTS 1 AND 2, 2007, 558-559 : 747 - +
  • [7] A role of low energy grain boundaries in the abnormal grain growth in Fe-3%Si alloy
    Zhu, Yechao
    Mao, Jionghui
    Tan, Fatang
    Qiao, Xueliang
    NUMBERS, INTELLIGENCE, MANUFACTURING TECHNOLOGY AND MACHINERY AUTOMATION, 2012, 127 : 89 - +
  • [8] Temperature Dependence of Lancet Domains in Grain-Oriented Fe-3%Si Steels
    Iwata, Keiji
    Suzuki, Masahiko
    Hashimoto, Michihiko
    Ueda, Masato
    Matuoka, Yoshiaki
    Yasue, Tsuneo
    Koshikawa, Takanori
    Kotsugi, Masato
    Ohkochi, Takuo
    Kinoshita, Toyohiko
    Watanabe, Yoshio
    Ishiyama, Kazushi
    IEEE TRANSACTIONS ON MAGNETICS, 2015, 51 (11)
  • [9] Temperature Dependence of Lancet Domains in Grain-Oriented Fe-3%Si Steels.
    Iwata, K.
    Suzuki, M.
    Hashimoto, M.
    Ueda, M.
    Matuoka, Y.
    Yasue, T.
    Koshikawa, T.
    Kotsugi, M.
    Ohkochi, T.
    Kinoshita, T.
    Watanabe, Y.
    Ishiyama, K.
    2015 IEEE MAGNETICS CONFERENCE (INTERMAG), 2015,
  • [10] Monte Carlo Simulation of Grain Growth in Fe-3 % Si Steels by Consideration of a Morphological Parameter
    Maazi, Neureddine
    Boukerma, Abdelghani
    Penelle, Richard
    Baudin, Thierry
    ADVANCED ENGINEERING MATERIALS, 2010, 12 (10) : 1015 - 1017