Final design of ITER port plug test facility

被引：1
|
作者：
Cerisier, Thierry [1 ]
Levesy, Bruno [1 ]
Romannikov, Alexander [2 ]
Rumyantsev, Yuri [3 ]
Cordier, Jean-Jacques [1 ]
Dammann, Alexis [1 ]
Minakov, Victor
Rosales, Natalya [3 ]
Mitrofanova, Elena [3 ]
Portone, Sergey [2 ]
Mironova, Ekaterina [2 ]
机构：
[1] ITER Org, Route Vinon Sur Verdon,CS 90046, F-13067 St Paul Les Durance, France
[2] Inst Project Ctr ITER, Kurchatov Sq 1,Bldg 3, Moscow 123182, Russia
[3] JSC Cryogenmash, Balashikha 143907, Moscow Reg, Russia
来源：
FUSION ENGINEERING AND DESIGN | 2016年 / 109卷
关键词：
Acceptance test; Hot cell; Refurbishment; Vacuum; Port plug; PROGRESS;
D O I：
10.1016/j.fusengdes.2015.12.064
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
To achieve the overall ITER machine availability target, the availability of diagnostics and heating port plugs shall be as high as 99.5%. To fulfill this requirement, it is mandatory to test the port plugs at operating temperature before installation on the machine and after refurbishment. The ITER port plug test facility (PPTF) is composed of several test stands that can be used to test the port plugs whereas at the end of manufacturing (in a non-nuclear environment), or after refurbishment in the ITER hot cell facility. The PPTF provides the possibility to perform environmental (leak tightness, vacuum and thermo-hydraulic performances) and functional tests (radio frequency acceptance tests, behavior of the plugs' steering mechanism and calibration of diagnostics) on upper and equatorial port plugs. The final design of the port plug test facility is described. The configuration of the standalone test stands and the integration" in the hot cell facility are presented. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码：1153 / 1157
页数：5
相关论文
共 50 条
  • [1] Design progress on ITER port plug test facility
    Levesy, B.
    Beaumont, B.
    Bruno, L.
    Cerisier, T.
    Cordier, J. J.
    Dammann, A.
    Giancarli, L.
    Henderson, M.
    Romannikov, A.
    Rumyantsev, Y.
    Udintsev, V. S.
    FUSION ENGINEERING AND DESIGN, 2012, 87 (7-8) : 1060 - 1064
  • [2] Dose rate analysis for the diagnostic generic equatorial port plug in the ITER port plug test facility
    Liu, Haibo
    Cerisier, Thierry
    Fischer, Ulrich
    Levesy, Bruno
    Romannikov, Alexander
    Serikov, Arkady
    FUSION ENGINEERING AND DESIGN, 2015, 98-99 : 2182 - 2186
  • [3] Final design of the generic equatorial port plug structure for ITER diagnostic systems
    Udintsev, V. S.
    Maquet, P.
    Alexandrov, E.
    Casal, N.
    Cuenca, D.
    Drevon, J. -M.
    Feder, R.
    Friconneau, J. P.
    Giacomin, T.
    Guirao, J.
    Iglesias, S.
    Josseaume, F.
    Levesy, B.
    Loesser, D.
    Ordieres, J.
    Quinn, E.
    Pak, S.
    Penot, C.
    Pitcher, C. S.
    Portales, M.
    Proust, M.
    Suarez, A.
    Seyvet, F.
    Tanchuk, V.
    Utin, Y.
    Vacas, C.
    Vasseur, C.
    Walsh, M. J.
    FUSION ENGINEERING AND DESIGN, 2015, 96-97 : 993 - 997
  • [4] Final design of the generic upper port plug structure for ITER diagnostic systems
    Pak, Sunil
    Feder, Russell
    Giacomin, Thibaud
    Guirao, Julio
    Iglesias, Silvia
    Josseaume, Fabien
    Kalish, Michael
    Loesser, Douglas
    Maquet, Philippe
    Ordieres, Javier
    Panizo, Marcos
    Pitcher, Spencer
    Portales, Mickael
    Proust, Maxime
    Ronden, Dennis
    Serikov, Arkady
    Suarez, Alejandro
    Tanchuk, Victor
    Udintsev, Victor
    Vacas, Christian
    Walsh, Michael
    Zhai, Yuhu
    FUSION ENGINEERING AND DESIGN, 2016, 102 : 21 - 27
  • [5] ITER DIAGNOSTIC PORT PLUG DESIGN
    Balshaw, N. H.
    Krivchenkov, Y.
    Phillips, G.
    Davis, S.
    Pampin-Garcia, R.
    FUSION SCIENCE AND TECHNOLOGY, 2009, 56 (02) : 661 - 665
  • [6] Progress on the ITER TBM port plug design
    Kim, Byoung-Yoon
    Marconi, Matteo
    Neviere, Jean-Christophe
    Merola, Mario
    Giancarli, Luciano M.
    Lucca, Flavio
    Gicquel, Stefan
    FUSION ENGINEERING AND DESIGN, 2015, 98-99 : 1509 - 1514
  • [7] Final design of the static magnetic field test facility for the ITER tokamak devices
    Wang, Shusheng
    Gao, Ge
    Sheng, Zhicai
    Yang, Yang
    Wang, Linsen
    FUSION ENGINEERING AND DESIGN, 2023, 188
  • [8] Nuclear analysis of ITER Test Blanket Module Port Plug
    Villari, Rosaria
    Kim, Byoung Yoon
    Barabash, Vladimir
    Giancarli, Luciano
    Levesy, Bruno
    Loughlin, Michael
    Merola, Mario
    Moro, Fabio
    Pascal, Romain
    Petrizzi, Luigino
    Polunovsky, Eduard
    Van der Laan, Jaap G.
    FUSION ENGINEERING AND DESIGN, 2015, 98-99 : 1668 - 1673
  • [9] The ITER Central Solenoid Module final test facility
    Schaubel, K.
    Langhorn, A.
    Lloyd, S.
    Piec, Z.
    Salazar, E.
    Smith, J.
    FUSION ENGINEERING AND DESIGN, 2017, 124 : 59 - 63
  • [10] ITER diagnostic port plug engineering design analysis in the EU
    Ciattaglia, E.
    Ingesson, L. C.
    Campbell, D.
    Saibene, G.
    Walker, C.
    Doceu, L.
    Dirken, P.
    Petrizzi, L.
    Heidinger, R.
    FUSION ENGINEERING AND DESIGN, 2007, 82 (5-14) : 1231 - 1237
12345