Surface breakage of fired iron ore pellets by impact

被引:21
|
作者
Cavalcanti, Pedro P. [1 ]
de Carvalho, Rodrigo M. [1 ]
das Chagas, Anderson S. [1 ]
da Silveira, Marcus W. [1 ]
Tavares, Luis Marcelo [1 ]
机构
[1] Univ Fed Rio de Janeiro, COPPE, Dept Met & Mat Engn, Rio De Janeiro, RJ, Brazil
关键词
Iron ore pellet; Modeling; Attrition; Surface breakage; Degradation; Discrete element method; FRACTURE PROBABILITY; PARTICLE ATTRITION; PARTICULATE SOLIDS; MODEL;
D O I
10.1016/j.powtec.2018.10.044
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Surface breakage or attrition occurs when iron ore pellets are subjected to handling stages in which the stressing level is insufficient to cause their massive fracture. This breakage mechanism has been investigated for five types of industrial iron ore pellets from impacts against a steel target, leading to a model that accounts for the effect of pellet size, impact energy and angle. The model is then validated on the basis of two different tests. First, a tumbling test on a small drum (0.305 m diameter) is used to demonstrate the validity of the model to describe surface breakage by motion of the pellets at comparatively low velocities, such as those that are found during flow in hoppers and silos. The model is also validated on the basis of simulations of a RO-TAP sieve shaker. It is demonstrated that it is able to predict with confidence results from the tests, proving to be a powerful tool when used in combination with simulations using the discrete element method, to predict mechanical degradation due to surface breakage during handling. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码:735 / 743
页数:9
相关论文
共 50 条
  • [31] DRYING MECHANISM OF IRON-ORE PELLETS
    NEKRASOVA, EV
    BUTKAREV, AP
    MAIZEL, GM
    KLEIN, VI
    KUZNETSOV, RF
    STEEL IN THE USSR, 1988, 18 (06): : 249 - 251
  • [32] Physical properties of initial iron ore pellets
    Abzalov, V.N.
    Starodumov, A.V.
    Mojzel', G.M.
    Stal', 2003, (09): : 10 - 12
  • [33] Pellets prepared with mechanically activated iron ore
    Mourão, Marcelo B.
    Takano, Cyro
    2008, Verlag Stahleisen GmbH (79)
  • [34] Intensifying the production of iron-ore pellets
    Isaev, EA
    Chernetskaya, IE
    RUSSIAN METALLURGY, 1997, (06): : 6 - 11
  • [35] Reduction of Iron Ore Pellets: A Microstructural Perspective?
    Sarkar, A.
    Chavan, V.
    Pai, N. N.
    Prakash, A.
    Hazra, B.
    Raut, P.
    Sunilkumar, D.
    Sivananda, C.
    Kundu, S.
    Nag, S.
    Basu, S.
    Samajdar, I.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2024, 55 (02): : 537 - 549
  • [36] Reduction of double layered iron ore pellets
    Sharma, T
    INTERNATIONAL JOURNAL OF MINERAL PROCESSING, 1997, 49 (3-4) : 201 - 206
  • [37] SOLID STATE BONDING IN IRON ORE PELLETS
    COOKE, SRB
    BRANDT, RE
    TRANSACTIONS OF THE AMERICAN INSTITUTE OF MINING AND METALLURGICAL ENGINEERS, 1954, 199 (04): : 411 - 415
  • [38] Pellets prepared with mechanically activated iron ore
    Mouro, Marcelo B.
    Takano, Cyro
    STEEL RESEARCH INTERNATIONAL, 2008, 79 (07) : 543 - 547
  • [39] Bentonite influence on quality of iron ore pellets
    Gorbachev, V.A.
    Evstyugin, S.N.
    Mal'tseva, V.E.
    Usol'tsev, D.Yu.
    Stal', 2003, (01): : 15 - 16
  • [40] Engineering iron ore pellets to reduce their dustiness
    J. A. Halt
    S. K. Kawatra
    Minerals & Metallurgical Processing, 2016, 33 (3) : 156 - 156