Preparation and evaluation of mechanical properties of 6061Al-Al2O3 metal matrix composites by stir casting process

被引：18

作者：

Sivananthan, S. ^{[1
]}

Reddy, V. Rajalaxman ^{[2
]}

Samuel, C. Samson Jerold ^{[3
]}

机构：

[1] K Ramakrishnan Coll Engn, Dept Mech Engn, Trichy 621112, India

[2] Saveetha Inst Med & Tech Sci, Dept Mech Engn, Chennai 600077, Tamil Nadu, India

[3] Sri Krishna Coll Engn & Technol, Dept Mech Engn, Coimbatore 641008, Tamil Nadu, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2020年 / 21卷

关键词：

Al6061; alloy; Aluminium oxide; Hardness; Ultimate tensile strength; Compression strength; WEAR; BEHAVIOR; MICROSTRUCTURE;

D O I：

10.1016/j.matpr.2019.06.744

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Aluminium oxide particle (0-4 wt%) reinforced Al6061 alloy metal matrix composites have been prepared using stir casting process. Mechanical properties such as hardness, tensile strength and compression of composites have been tested and the values are compared with Al6061 alloy. The results reveal that mechanical properties of MMC is greatly enhanced by the addition of Al2O3 particles in Al6061 alloy. Hardness, ultimate tensile strength and compression strength of Al6061 alloy increased with increasing weight fraction of aluminium oxide particles in aluminium matrix. This developed MMC can be used in automotive applications because of its excellent mechanical properties while compared to Al6061 alloy. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：713 / 716

页数：4

共 50 条

[1] Preparation and investigation of mechanical properties of 1350-h19 Al-Zn-Al2O3 hybrid metal matrix composites by stir casting process
Anand, Anshu
Tiwari, Sanjiv Kumar
MATERIALS TODAY-PROCEEDINGS, 2022, 61 : 73 - 77
[2] Influence of Ultrasonic Assisted Stir Casting on Mechanical Properties of Al6061-nano Al2O3 Composites
Koli, Dinesh Kumar
Agnihotri, Geeta
Purohit, Rajesh
MATERIALS TODAY-PROCEEDINGS, 2015, 2 (4-5) : 3017 - 3026
[3] Mechanical and Wear Properties of Al-Al2O3 Metal Matrix Composites Fabricated by the Combined Effect of Stir and Squeeze Casting Method
Sekar, K.
Allesu, K.
Joseph, M. A.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2015, 68 : S115 - S121
[4] Mechanical and Wear Properties of Al–Al2O3 Metal Matrix Composites Fabricated by the Combined Effect of Stir and Squeeze Casting Method
K. Sekar
K. Allesu
M. A. Joseph
Transactions of the Indian Institute of Metals, 2015, 68 : 115 - 121
[5] Microstructure and mechanical properties of extruded Al/Al2O3 composites fabricated by stir-casting process
Ezatpour, H. R.
Torabi-Parizi, M.
Sajjadi, S. A.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2013, 23 (05) : 1262 - 1268
[6] Thermal analysis on Al7075/Al2O3 metal matrix composites fabricated by stir casting process
Jacob, S.
Shajin, S.
Gnanavel, C.
INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN ENGINEERING RESEARCH, 2017, 183
[7] Microstructural observation and mechanical properties behavior of Al2O3/Al6061 nanocomposite fabricated by stir casting process
Awate, Pankaj P.
Barve, Shivprakash B.
ENGINEERING RESEARCH EXPRESS, 2022, 4 (01):
[8] Characterization and evaluation of microstructure and mechanical properties of ZrO2 reinforced Al6061 metal matrix composite using stir casting process
Lokesh, N.
Sudheerreddy, J.
Siddeshkumar, N. G.
Kotresh, Kotgi
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 (04) : 4306 - 4319
[9] Microstructural and mechanical properties of Al2O3 reinforced Al7010 matrix composites, fabricated by stir casting
Wahid, F.
Hafeez, M. A.
Farooq, A.
Anum, T.
JOURNAL OF THE PAKISTAN INSTITUTE OF CHEMICAL ENGINEERS, 2021, 49 (01): : 63 - 72
[10] Microstructural characterization and mechanical properties of TiB2 reinforced Al6061 matrix composites produced using stir casting process
Pazhouhanfar, Y.
Eghbali, B.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 710 : 172 - 180

← 1 2 3 4 5 →