Polyethylene/MMT nanocomposites prepared by in situ polymerization using supported catalyst systems

被引：55
|
作者：
Lee, DH [1 ]
Kim, HS
Yoon, KB
Min, KE
Seo, KH
Noh, SK
机构：
[1] Kyungpook Natl Univ, Coll Engn, Dept Polymer Sci, Taegu 702701, South Korea
[2] Yeungnam Univ, Sch Chem Engn & Technol, Kyongsan 712749, South Korea
来源：
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS | 2005年 / 6卷 / 05期
关键词：
polyethylene; MMT; nanocomposites; in situ polymerization;
D O I：
10.1016/j.stam.2005.04.004
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A polyethylene/montmorillonite(MMT) nanocomposite was prepared by in situ polymerization method using MMT-supported methylaluminoxane(MAO) cocatalyst and/or Cp2ZrCl2 catalyst. The catalyst components had been supported on the unmodified MMT-Na and modified commercial product, Cloisite 25A. With XRD it was found that the layered silicate gallery of Cloisite 25A was exfoliated by incorporating MAO cocatalyst and zirconocene catalyst while the d-spacing of MMT-Na was less changed. The in situ polymerization of ethylene was carried out to prepare the nanocomposite by using the supported MMT, and the fully exfoliated product was obtained with Cloisite 25A. The decomposition temperature of the obtained nanocomposite increased up to 25 degrees C, but the melting temperature was not improved much. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码：457 / 462
页数：6
相关论文
共 50 条
  • [41] Highly exfoliated PE/Na+MMT nanocomposite produced via in situ polymerization by a catalyst supported on a novel modified Na+MMT
    Sadegh Abedi
    Majid Abdouss
    Majid Daftari-Besheli
    Seyed Mehdi Ghafelehbashi
    Farhad Azadi
    Seyed Reza Nokhbeh
    Ali Safinejad
    Polymer Bulletin, 2013, 70 : 2783 - 2792
  • [42] Thermal, mechanical, and barrier properties of polyethylene terephthalate-platelet nanocomposites prepared by in situ polymerization
    Li, Shigeng
    Auddy, Kausick
    Barber, Peter
    Hansen, Tara J.
    Ma, Jisheng
    zur Loye, Hans-Conrad
    Ploehn, Harry J.
    POLYMER ENGINEERING AND SCIENCE, 2012, 52 (09): : 1888 - 1902
  • [43] Polyethylene/graphite oxide nanocomposites obtained by in situ polymerization using modified graphite oxide-supported metallocene catalysts
    Hu, Zhang
    Liu, Chengbin
    JOURNAL OF POLYMER RESEARCH, 2013, 20 (01)
  • [44] Polyethylene/clay nanocomposites prepared by polymerization compounding method
    Gaboune, A
    Ray, SS
    Ait-Kadi, A
    Riedl, B
    Bousmina, M
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2006, 6 (02) : 530 - 535
  • [45] Linear Low-Density Polyethylene Nanocomposites by In Situ Polymerization Using a Zirconium-Nickel Tandem Catalyst System
    Pinheiro, Adriana C.
    Casagrande, Adriana C. A.
    Casagrande, Osvaldo L., Jr.
    JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, 2014, 52 (24) : 3506 - 3512
  • [46] Investigation of properties of polyethylene/clay nanocomposites prepared by new in situ Ziegler-Natta catalyst
    Nikkhah, S. Javan
    Ramazani S. A., A.
    Baniasadi, H.
    Tavakolzadeh, F.
    MATERIALS & DESIGN, 2009, 30 (07) : 2309 - 2315
  • [47] Comparison of characteristics of SAN-MMT nanocomposites prepared by emulsion and solution polymerization
    Noh, MH
    Lee, DC
    JOURNAL OF APPLIED POLYMER SCIENCE, 1999, 74 (12) : 2811 - 2819
  • [48] Preparation and properties of polyethylene/montmorillonite nanocomposites by in situ polymerization
    Yang, F
    Zhang, XQ
    Zhao, HC
    Chen, B
    Huang, BT
    Feng, ZL
    JOURNAL OF APPLIED POLYMER SCIENCE, 2003, 89 (13) : 3680 - 3684
  • [49] Study on the Properties of MWNTs/Polyethylene Nanocomposites by In Situ Polymerization
    Li, Shiyun
    Hu, Desheng
    ADVANCED MECHANICAL ENGINEERING II, 2012, 192 : 289 - +
  • [50] Polyethylene/palygorskite nanocomposites: Preparation by in situ polymerization and their characterization
    Li, Wei
    Adams, Alina
    Wang, Jingdai
    Bluemich, Bernhard
    Yang, Yongrong
    POLYMER, 2010, 51 (21) : 4686 - 4697
12345