Servo parameter tuning for a 5-axis machine center based upon GA rules

被引：19

作者：

Kuo, LY ^{[1
]}

Yen, JY ^{[1
]}

机构：

[1] Ind Technol Res Ctr, Mech Engn Res Lab, Taichung, Taiwan

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2001年 / 41卷 / 11期

关键词：

servosystems; motion control; machine tool control;

D O I：

10.1016/S0890-6955(01)00031-1

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper addresses the use of the genetic algorithm (GA) to tune the servo controller in a multi-axis CNC machine center. Because the number of parameters in a CNC controller is usually very large and their effects are highly coupled, tuning these parameters is a task requiring great skill. In this paper, the genetic algorithm is applied to tune the servo parameters in a commercial CNC machine controller. The controller is a PC-based open architecture system, thus allowing the GA to be implemented on a personal computer. In this study, a dynamic mutation amplitude process is also introduced to improve the quality of evolution. Experimental results obtained on a Siemens 840D CNC controller indicate that the proposed method is able to automatically identify the effect of each parameter and to tune the controller so as to achieve expert level performance. (C) 2001 Elsevier Science Ltd. All rights reserved.

引用

页码：1535 / 1550

页数：16

共 18 条

[1]

ALTER DM, 1994, PROCEEDINGS OF THE 1994 AMERICAN CONTROL CONFERENCE, VOLS 1-3, P3303

[2]

ARAKAWA A, 1996, P 1996 4 INT WORKSH, P625

[3] Model-based disturbance attenuation for CNC machining centers in cutting process [J].

Choi, BK ;

Choi, CH ;

Lim, H .

IEEE-ASME TRANSACTIONS ON MECHATRONICS, 1999, 4 (02) :157-168

[4] Performance optimization of a fast tool servo for single-point diamond turning machines [J].

Cuttino, JF ;

Miller, AC ;

Schinstock, DE .

IEEE-ASME TRANSACTIONS ON MECHATRONICS, 1999, 4 (02) :169-179

[5]

FORNARO RJ, 1988, C RECORD 1998 IEEE I, V2, P1429

[6]

ISHIGAMI H, 1994, 1994 IEEE INTERNATIONAL CONFERENCE ON NEURAL NETWORKS, VOL 1-7, P1566, DOI 10.1109/ICNN.1994.374389

[7] Design of self-learning fuzzy sliding mode controllers based on genetic algorithms [J].

Lin, SC ;

Chen, YY .

FUZZY SETS AND SYSTEMS, 1997, 86 (02) :139-153

[8] Dynamic gain motion control with multi-axis trajectory monitoring for machine tool systems [J].

Liu, JC ;

Yamazaki, K ;

Yokoyama, Y .

1998 5TH INTERNATIONAL WORKSHOP ON ADVANCED MOTION CONTROL - PROCEEDINGS: AMC '98 - COIMBRA, 1998, :316-321

[9] Ship steering control system optimisation using genetic algorithms [J].

McGookin, EW ;

Murray-Smith, DJ ;

Li, Y ;

Fossen, TI .

CONTROL ENGINEERING PRACTICE, 2000, 8 (04) :429-443

[10] Intelligent cross-coupled fuzzy feedrate controller design for CNC machine tools based on genetic algorithms [J].

Tarng, YS ;

Chuang, HY ;

Hsu, WT .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1999, 39 (10) :1673-1692

← 1 2 →