Delamination detection in composites through guided wave field image processing

This study explores the feasibility of using a non-contact guided wave imaging system to detect hidden delamination in multi-layer composites. The study is conducted in two phases. In the first phase, Lamb waves are excited by a lead (Pb) Zirconate Titanate transducer (PZT) mounted on the surface of a composite plate, and the out-of-plane velocity field is measured using a one-dimensional (1D) scanning laser Doppler vibrometer (LDV). From the scanned time signals, wavefield images are constructed and processed to study the interaction of Lamb waves with delamination. The paper presents additional signal and image processing techniques used to highlight the defect in the scanned area. The techniques are demonstrated using experimental data collected from a 1.8 mm thick multi-layer composite. In the second phase, a completely non-contact system is described to excite and measure guided waves. A modulated continuous wave (CW) laser source in conjunction with a photodiode is used to wirelessly excite an attached PZT and the resulting waves are again sensed using the vibrometer. The non-contact system is used to excite and measure elastic waves in a composite channel test article. The elastic wave propagation image sequences are created from the non-contact excitation system. (C) 2011 Elsevier Ltd. All rights reserved.