Unbalance response and touch-rubbing threshold speed of rotor subjected to nonlinear magnetic forces

被引:3
作者
Jing Minqing [1 ]
Li Zixin [1 ]
Luo Min [1 ]
Yu Lie [1 ]
机构
[1] Xian Jiaotong Univ, Coll Mech Engn, Xian 710049, Peoples R China
关键词
active magnetic bearing (AMB); vibration non-linearity; touch-rubbing speed;
D O I
10.3901/CJME.2008.02.001
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Because of the effect of unbalance excitation and nonlinear magnetic force, the large vibration of the rotor supported by active magnetic bearing(AMB) will go beyond the radial gap of the bearing, even causing mechanical touch-rubbing when the system works at an operational speed closer to the critical speed. In order to investigate this problem, the linear model and nonlinear model of the single mass symmetric rigid rotor system supported by AMB are established respectively and the corresponding transfer functions of close-loop system are given. To pass through the numerical calculation by using MATLAB/Simulink, the effect of both the unbalance response and threshold speed of touch-rubbing of the system subjected to nonlinear magnetic forces and nonlinear Output current of power amplifier are studied. Furthermore, threshold speed of touch-rubbing of the rotor-bearing system is defined and the results of numerical simulation are presented, Finally, based on above studies, two methods of increasing the touch-rubbing threshold speed are discussed.
引用
收藏
页码:1 / 4
页数:4
相关论文
共 8 条
  • [1] CHIACCHIARINI HG, 2001, IEEE C CONTR APPL P, P58
  • [2] Durali M., 1999, International Journal of Modelling and Simulation, V19, P397
  • [3] [何钦象 He Qinxiang], 2004, [应用力学学报, Chinese Journal of Applied Mechanics], V21, P113
  • [4] JI JC, 2000, 7 INT S MAGN BEAR ET, P23
  • [5] LIU SQ, 2000, 7 INT S MAGN BEAR ET, P305
  • [6] [刘占生 Liu Zhansheng], 2004, [航空动力学报, Journal of Aerospace Power], V19, P38
  • [7] Weak and strong nonlinearities in magnetic bearings
    Pust, L
    [J]. MECHANISM AND MACHINE THEORY, 2004, 39 (07) : 779 - 795
  • [8] Wang YF, 2007, INT J NONLIN SCI NUM, V8, P375