A study on structure improvement scheme of electromagnetic flow sensor for slurry flow measurement

被引:5
作者
Gao, Song [1 ]
Ma, Hao [1 ]
机构
[1] Henan Univ Sci & Technol, Coll Agr Equipment Engn, 263 Kaiyuan Ave, Luoyang 471023, Peoples R China
基金
中国国家自然科学基金;
关键词
electromagnetic flow sensor; slurry noise; calibration; measurement;
D O I
10.1177/00202940211064589
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
A scheme to improve the structure of electromagnetic flow sensor is put forward in this paper, which can effectively solve the slurry noise problem when electromagnetic flowmeter measures slurry fluid. The electromagnetic flow sensor used for measuring slurry fluid has slurry noise interference in the measurement signal. At present, the method of increasing the excitation frequency of electromagnetic flow sensor is widely used to overcome slurry noise. However, high excitation frequency will lead to poor stability of zero point. In view of the shortcomings of existing methods, this paper studies the method of improving sensor structure to overcome slurry noise. Firstly, according to the mechanism of slurry noise, an improved scheme for the installation position of the measuring electrode of electromagnetic flow sensor is proposed, which can greatly reduce the probability of solid particles of slurry fluid colliding with the measuring electrode; Then, the relevant research results of bubble dynamics theory are applied to optimize the improvement scheme, and the improvement scheme is determined, through calibration, it is concluded that the improved sensor can reach the accuracy level of 1.0; Finally, through slurry measurement experiments, it is verified that the improved electromagnetic flow sensor can effectively overcome slurry noise.
引用
收藏
页码:519 / 534
页数:16
相关论文
共 39 条
[11]  
Li B., 2014, PATENT CHINA, V9, P2014
[12]   Study of the Ability of an Electromagnetic Flowmeter Based on Step Excitation to Overcome Slurry Noise [J].
Li, Bin ;
Yan, Yue ;
Chen, Jie ;
Fan, Xinghang .
IEEE ACCESS, 2020, 8 :126540-126558
[13]  
Liang L, 2010, SIGNAL MODELING PROC
[14]   Dynamic Offset Correction of Electromagnetic Flowmeters [J].
Linnert, Michael A. ;
Mariager, Simon O. ;
Rupitsch, Stefan J. ;
Lerch, Reinhard .
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2019, 68 (05) :1284-1293
[15]  
Liu B, 2006, STUDY MECH MECH BUBB
[16]  
Liu S., 2007, J CHONGQING JIAOTONG, V26, P136
[17]  
Pang Bing, 2015, Electric Machines and Control, V19, P102, DOI 10.15938/j.emc.2015.01.015
[18]  
Pithon MM, 2015, AM J ORTHOD DENTOFAC, V148, P891, DOI 10.1016/j.ajodo.2015.09.013
[19]  
Scott R., 2012, Patent, Patent No. [CN101784870B, 101784870]
[20]  
[田恒斗 TIAN Hengdou], 2010, [化工学报, Journal of Chemical Industry and Engineering (China)], V61, P15