Experimental Study on Static and Dynamic Compression Mechanical Properties of Filled Rock Joints

被引:13
作者
Chai, Shaobo [1 ,2 ,3 ]
Wang, Hao [1 ]
Yu, Liyuan [2 ]
Shi, Jiehui [1 ]
Abi, Erdi [3 ]
机构
[1] Changan Univ, Sch Civil Engn, Xian 710064, Peoples R China
[2] China Univ Min & Technol, State Key Lab GeoMech & Deep Underground Engn, Xuzhou 221116, Jiangsu, Peoples R China
[3] Chongqing Jiaotong Univ, Sch River & Ocean Engn, Chongqing 400045, Peoples R China
基金
中国国家自然科学基金;
关键词
Filled rock joint; Static compression; Dynamic impact; Mechanical properties; Joint thickness; DAMAGE CONSTITUTIVE MODEL; SHEAR-STRENGTH; BRITTLE SANDSTONE; BEHAVIOR; VELOCITY; ATTENUATION; FRACTURE; MASS; FLAWS;
D O I
10.1590/1679-78255988
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The static and dynamic compression mechanical properties of the prefabricated artificial filled rock joints specimens with different fillings and different joint thicknesses are tested, respectively. Then, the strength, deformation, wave propagation and energy dissipation laws of the filled joints are analyzed. The experimental results show that the static and dynamic compression strength of filled joints increases with the strength of filling materials while decreases with the filling thickness. The deformation characteristics of filled joints under static and dynamic compression are positively correlated with the properties of filling materials and the thickness of filled joints. With the increasing of the filling thickness, the reflection coefficient increases while the transmission coefficient decreases. With the increase of the strength of the fillings, the reflection coefficient decreases while the transmission coefficient increases. The energy dissipation ratio decreases with the increase of the filliing thickness and increases with the increase of the strength of the filling material.
引用
收藏
页数:15
相关论文
共 34 条
[1]   Effects of aligned fractures on the response of velocity and attenuation ratios to water saturation variation: a laboratory study using synthetic sandstones [J].
Amalokwu, Kelvin ;
Best, Angus I. ;
Chapman, Mark .
GEOPHYSICAL PROSPECTING, 2016, 64 (04) :942-957
[2]  
[Anonymous], 1973, Wave Propagation in Elastic Solids
[3]   Some Effects of Shearing Velocity on the Shear Stress-Deformation Behaviour of Hard-Soft Artificial Material Interfaces [J].
Atapour H. ;
Moosavi M. .
Geotechnical and Geological Engineering, 2013, 31 (05) :1603-1615
[4]   The Influence of Shearing Velocity on Shear Behavior of Artificial Joints [J].
Atapour, Hadi ;
Moosavi, Mahdi .
ROCK MECHANICS AND ROCK ENGINEERING, 2014, 47 (05) :1745-1761
[5]   FUNDAMENTALS OF ROCK JOINT DEFORMATION [J].
BANDIS, SC ;
LUMSDEN, AC ;
BARTON, NR .
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 1983, 20 (06) :249-268
[6]   SHEAR-STRENGTH OF ROCK AND ROCK JOINTS [J].
BARTON, N .
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 1976, 13 (09) :255-279
[7]   Experimental Study on Wave Propagation Across a Rock Joint with Rough Surface [J].
Chen, X. ;
Li, J. C. ;
Cai, M. F. ;
Zou, Y. ;
Zhao, J. .
ROCK MECHANICS AND ROCK ENGINEERING, 2015, 48 (06) :2225-2234
[8]   Experimental Study on the Shear Strength of Sandy Clay Infilled Regular Rough Rock Joints [J].
Jahanian, Homayoun ;
Sadaghiani, Mohammad Hosein .
ROCK MECHANICS AND ROCK ENGINEERING, 2015, 48 (03) :907-922
[9]  
Li H.B, 2006, KEY ENG MATER, P2435
[10]   An SHPB Test Study on Stress Wave Energy Attenuation in Jointed Rock Masses [J].
Li, J. C. ;
Rong, L. F. ;
Li, H. B. ;
Hong, S. N. .
ROCK MECHANICS AND ROCK ENGINEERING, 2019, 52 (02) :403-420