A study on the evaluation of creep degradation of high temperature pipeline steel by non-destructive test

被引：0
作者：
Lee, SG [1 ]
机构：
[1] Korea Elect Power Res Inst, Taejon, South Korea
来源：
ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4 | 2005年 / 297-300卷
关键词：
power plant; high-temperature pipeline steel; creep damage; ultrasonic measurement; non-destructive test;
D O I：
10.4028/www.scientific.net/KEM.297-300.1945
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this paper, artificial creep degradation test and ultrasonic measurement for their creep degraded specimens (Cr-Mo alloy steel) were carried out for the purpose of evaluation for creep damage. Absolute measuring method of quantitative ultrasonic measurement for material degradation was established, and long-term creep degradation tests using creep life prediction formula were carried out. As a result of ultrasonic tests for crept specimens, we conformed that both the sound velocity decreased and attenuation coefficient linearly increased in proportion to the increase of creep life fraction (phi(c)). In frequency and noise analysis, it was conformed that the high frequency side spectra and central frequency components shift to low frequency band, and bandwidths decrease as increasing creep damage in backwall echo. And also, the ultrasonic noise linearly increased in proportion to the increase of creep degradation.
引用
收藏
页码：1945 / 1950
页数：6
相关论文
共 50 条
[31]   Visual, Non-Destructive, and Destructive Investigations of Polyethylene Pipes with Inhomogeneous Carbon Black Distribution for Assessing Degradation of Structural Integrity [J].
Kim, Taesik ;
Deveci, Suleyman ;
Yang, Inmo ;
Stakenborghs, Bob ;
Choi, Sunwoong .
POLYMERS, 2022, 14 (05)
[32]   Non-destructive techniques for the detection of sigma phase in duplex stainless steel: A comprehensive review [J].
Biezma, M., V ;
Martin, U. ;
Linhardt, P. ;
Ress, J. ;
Rodriguez, C. ;
Bastidas, D. M. .
ENGINEERING FAILURE ANALYSIS, 2021, 122
[33]   Estimation of compressive strength of high-strength concrete with recycled aggregate using non-destructive test and numerical analysis [J].
Cho, Y. S. ;
Baek, S. K. ;
Lee, Y. T. ;
Kim, S. H. ;
Hong, S. U. .
MATERIALS RESEARCH INNOVATIONS, 2014, 18 :270-277
[34]   Non-Destructive Evaluation of Thermal Treatment Influence on Elastic Engineering Parameters of Poplar [J].
Aydin, Tugba Yilmaz ;
Aydin, Murat .
DRVNA INDUSTRIJA, 2024, 75 (04) :405-418
[35]   Evaluating the durability performance of wood-based panels by a non-destructive bending test [J].
Kojima, Yoichi ;
Sakakibara, Akira ;
Kobori, Hikaru ;
Suzuki, Shigehiko .
JOURNAL OF WOOD SCIENCE, 2016, 62 (03) :263-269
[36]   Evaluating the durability performance of wood-based panels by a non-destructive bending test [J].
Yoichi Kojima ;
Akira Sakakibara ;
Hikaru Kobori ;
Shigehiko Suzuki .
Journal of Wood Science, 2016, 62 :263-269
[37]   Using photons for non-destructive testing of thick materials: a simulation study [J].
Oishi, R ;
Nagai, H .
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2004, 535 (03) :706-715
[38]   Design Techniques and Tradeoffs in Implementing Non-destructive Field Test Using Logic BIST Self-test [J].
Dutta, Amit ;
Shah, Malav ;
Swathi, G. ;
Parekhji, Rubin A. .
2009 15TH IEEE INTERNATIONAL ON-LINE TESTING SYMPOSIUM, 2009, :237-242
[39]   Optimization and Non-destructive Test Analysis of SS316L Weldments Using GTAW [J].
Chandrakantha, Balaji ;
Kumar, S. V. Abinesh ;
Kumar, S. Ashwin ;
Sathish, R. .
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2014, 17 (01) :190-195
[40]   Prediction of Compressive Strength by Considering Practical Consideration Non-destructive Test by Artificial Neural Network [J].
Gangele, Priyesh ;
Patel, Arun Kumar .
JOURNAL OF MATERIALS AND ENGINEERING STRUCTURES, 2025, 12 (01) :47-62
12345