A new approach to the setting of directional overcurrent relays by incorporating cascading outages

Directional Overcurrent Relays (DOCRs) are essential protective devices in distribution networks which are usually set without considering any contingencies. However, the current challenge in power systems is the existence of uncertainty and its unfavorable consequences. It sometimes appears that some elements simultaneously fail which makes other parts overloaded to the extent that it leads to cascading outages. Therefore. DOCRs may malfunction, which ends in unwanted trips when there is no fault, or they may not operate in case the fault is located within their reach. In such cases, the coordination setting needs complex programming with many related non-linear inequality constraints. In this paper, a novel hybrid method is proposed based on multi-objective optimization including new objective functions using Genetic Algorithm (GA). Also, the cascading outages are considered in the presented method based on network data analysis. This approach is performed on distribution part of the IEEE 14-bus meshed system and a real industrial radial feeder named TOSEE, located in Iran. The simulations were implemented in MATLAB and PowerFactory-DIgSILENT software packages in different models and the results are evaluated. (C) 2022 Sharif University of Technology. All rights reserved.