Surface modification of silica aerogels dried with 2-methyl-1-propanol in the sub-critical pressure

Silica aerogels were made by sol-gel techniques using industrial silicon derivatives (polyethoxydisiloxanes, E-40), followed by drying under sub-critical pressure with iso-butanol. The shrinkage (linear), specific surface area, S-BET, SEM, TEM and the pore size distribution of the silica aerogels were investigated. The results show that the shrinkage (linear) is below 5%, diameter of the silica particles is about 6 nm and the pore size of the silica aerogels is 10 nm. The specific surface area of the silica aerogel is 559.2 m(2)/g. IR and NMR techniques were used to determine the organic groups on the silica matrix, GC/MS was also introduced to analyse the composition of the recycled iso-butanol. The surface modification and the reactions of iso-butanol to the silica aerogel are also discussed.