Performance of composite Nafion/PVA membranes for direct methanol fuel cells

被引:67
|
作者
Molla, Sergio [2 ]
Compan, Vicente [1 ,2 ]
机构
[1] Univ Politecn Valencia, Dpto Termodinam Aplicada, ETSII, Valencia 46022, Spain
[2] ITE, Valencia 46980, Spain
关键词
DMFC; Methanol permeability; Nanocomposite Nafion (R) membranes; PVA; Nanofibers; PROTON CONDUCTIVITY; HYBRID MEMBRANE; PERMEABILITY; NAFION(R); CROSSOVER;
D O I
10.1016/j.jpowsour.2010.11.022
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
This work has been focused on the characterization of the methanol permeability and fuel cell performance of composite Nafion/PVA membranes in function of their thickness, which ranged from 19 to 97 mu m. The composite membranes were made up of Nafion (R) polymer deposited between polyvinyl alcohol (PVA) nanofibers. The resistance to methanol permeation of the Nafion/PVA membranes shows a linear variation with the thickness. The separation between apparent and true permeability permits to give an estimated value of 4.0 x 10(-7) cm(2) s(-1) for the intrinsic or true permeability of the bulk phase at the composite membranes. The incorporation of PVA nanofibers causes a remarkable reduction of one order of magnitude in the methanol permeability as compared with pristine Nafion (R) membranes. The DMFC performances of membrane-electrode assemblies prepared from Nafion/PVA and pristine Nafion (R) membranes were tested at 45,70 and 95 degrees C under various methanol concentrations, i.e.,1, 2 and 3M. The nanocomposite membranes with thicknesses of 19 mu m and 47 mu m reached power densities of 211 mW cm(-2) and 184 mW cm(-2) at 95 degrees C and 2M methanol concentration. These results are comparable to those found for Nafion (R) membranes with similar thickness at the same conditions, which were 210 mW cm(-2) and 204 mW cm(-2) respectively. Due to the lower amount of Nafion (R) polymer present within the composite membranes, it is suggested a high degree of utilization of Nafion (R) as proton conductive material within the Nafion/PVA membranes, and therefore, significant savings in the consumed amount of Nafion (R) are potentially able to be achieved. In addition, the reinforcement effect caused by the PVA nanofibers offers the possibility of preparing membranes with very low thickness and good mechanical properties, while on the other hand, pristine Naf (R) ion membranes are unpractical below a thickness of 50 mu m. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码:2699 / 2708
页数:10
相关论文
共 50 条
  • [31] Organic silica/Nafion® composite membrane for direct methanol fuel cells
    Ren, Suzhen
    Sun, Gongquan
    Li, Chennan
    Liang, Zhenxing
    Wu, Zhimou
    Jin, Wei
    Qin, Xin
    Yang, Xuefeng
    JOURNAL OF MEMBRANE SCIENCE, 2006, 282 (1-2) : 450 - 455
  • [32] Mesostructured-aluminosilicate-Nafion hybrid membranes for direct methanol fuel cells
    Meenakshi, S.
    Sahu, A. K.
    Bhat, S. D.
    Sridhar, P.
    Pitchumani, S.
    Shukla, A. K.
    ELECTROCHIMICA ACTA, 2013, 89 : 35 - 44
  • [33] PTFE coated Nafion proton conducting membranes for direct methanol fuel cells
    Chiu, K. -F.
    Chen, Y. -R.
    Lin, H. C.
    Ho, W. H.
    SURFACE & COATINGS TECHNOLOGY, 2010, 205 (05): : 1647 - 1650
  • [34] Nafion-polyfurfuryl alcohol nanocomposite membranes for direct methanol fuel cells
    Liu, J
    Wang, HT
    Cheng, SA
    Chan, KY
    JOURNAL OF MEMBRANE SCIENCE, 2005, 246 (01) : 95 - 101
  • [35] Modified Nafion Membranes by Catalytic Materials for Direct Methanol Fuel Cells Applications
    Tian, Ai Hua
    Shen, Dong Hui
    ADVANCES IN APPLIED MATERIALS AND ELECTRONICS ENGINEERING II, 2013, 684 : 90 - 93
  • [36] Incorporating graphene oxide to improve the performance of Nafion-mordenite composite membranes for a direct methanol fuel cell
    Prapainainar, Paweena
    Pattanapisutkun, Noppawan
    Prapainainar, Chaiwat
    Kongkachuichay, Paisan
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2019, 44 (01) : 362 - 378
  • [37] Diphenylsilicate-incorporated Nafion® membranes for reduction of methanol crossover in direct methanol fuel cells
    Liang, Z. X.
    Zhao, T. S.
    Prabhuram, J.
    JOURNAL OF MEMBRANE SCIENCE, 2006, 283 (1-2) : 219 - 224
  • [38] Nafion/microporous titanosilicate ETS-4 composite membranes for effective methanol crossover reduction in direct methanol fuel cells
    Jeon, Jae-Deok
    Kim, Jihoon
    Kwak, Seung-Yeop
    JOURNAL OF MEMBRANE SCIENCE, 2012, 415 : 353 - 359
  • [39] Casting Nafion-sulfonated organosilica nano-composite membranes used in direct methanol fuel cells
    Li, CN
    Sun, GQ
    Ren, SZ
    Liu, J
    Wang, Q
    Wu, ZM
    Sun, H
    Jin, W
    JOURNAL OF MEMBRANE SCIENCE, 2006, 272 (1-2) : 50 - 57
  • [40] Preparation of Composite Nafion/polyphenylene Oxide(PPO) with Hetropoly Acid(HPA) Membranes for Direct Methanol Fuel Cells
    Kim, Donghyun
    Sauk, Junho
    Kim, Hwayong
    Lee, Kab Soo
    Sung, Joon Yong
    KOREAN CHEMICAL ENGINEERING RESEARCH, 2006, 44 (02): : 187 - 192