A cascode modulated class-E power amplifier for wireless communications

A cascode modulated CMOS class-E power amplifier (PA) is presented in this paper. It is shown that by applying a modulated signal to the gate of the cascode transistor the output power is modulated. The main advantage of the proposed technique is a high 35 dB output power dynamic range. The peak power added efficiency (PAE) is 35%. The concept of the cascode power control of class-E RF PA operating at 2.2 GHz with 18 dBm output power was implemented in a 0.18 mu m CMOS technology and the performance has been verified by measurements. The prototype CMOS PA is tested by single tone excitation and by enhanced data rates for GSM evolution (EDGE) modulated signal. Digital predistortion is used to linearize the transfer characteristic. The EDGE spectrum mask is met and the rms error vector magnitude (EVM) is less than 4 degrees in the entire output power range. (C) 2010 Elsevier Ltd. All rights reserved.