Poly(ε-caprolactone)-based 'green' plasticizers for poly(vinyl choride)

被引:52
作者
Shi, Guixin [1 ]
Cooper, David G. [1 ]
Maric, Milan [1 ]
机构
[1] McGill Univ, Dept Chem Engn, Montreal, PQ H3A 2B2, Canada
基金
加拿大自然科学与工程研究理事会;
关键词
Poly(epsilon-caprolactone); 'Green' plasticizer; Biodegradation; DEHP; PVC; BIODEGRADABLE POLYMERS; DIBENZOATE; MIGRATION; PHTHALATE; PVC; METABOLITES; MORPHOLOGY; ADDITIVES; FILMS;
D O I
10.1016/j.polymdegradstab.2011.06.007
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
A series of proposed plasticizers for poly(vinyl chloride) (PVC), based on poly(epsilon-caprolactone) (PCL) with octanoate and benzoate-terminal groups, were synthesized with various microstructures and molecular weights (MW) and tested for biodegradability as well as for mechanical performance, and leaching resistance in blends with PVC. The plasticization efficiency of each was characterized by measuring the glass transition temperature (T-g) and tensile properties of PCL/PVC blends. The PCL-octanoate plasticizers demonstrated plasticization efficiency similar to di(ethylhexyl) phthalate (DEHP) with the same plasticizer loading. PCL-benzoate/PVC blends had much higher T(g)s (similar to 20 degrees C higher) compared to PCL-octanoate/PVC and DEHP/PVC blends. Yield stresses were about two times higher for PCL-benzoate/PVC blends compared to PCL-octanoate/PVC and DEHP/PVC blends, reflecting the stiffer nature of such blends. Biodegradation was rapid for all PCL-octanoates, with the exception of linear PCL-octanoates with arm molecular weights >10(3) g mol(-1). Biodegradation rates of PCLs by Rhodococcus rhodocrous were not affected by microstructure for the range of PCL topologies studied (linear versus three or four arms) but were slower for PCLs made from commercial PCL-diols that had a central ether linkage due to the initiator used to make these compounds. Leaching resistance was higher as PCL molecular weight increased and, for pairs of comparable sized species, significantly less PCL-benzoate leached out compared to the PCL-octanoate. For the range of PCL topologies studied, the number of arms did not significantly affect leaching resistance. In summary, both the end group and the molecular weight influenced the leaching resistance of the PCL PCL-octanoates were comparable plasticizers to DEHP in terms of the mechanical properties examined, and were rapidly degraded by a common soil microorganism. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1639 / 1647
页数:9
相关论文
共 29 条
[1]   Migration of additives from food grade polyvinyl chloride (PVC) films: Effect of plasticization by polymeric modifiers instead of conventional plasticizers [J].
Audic, JL ;
Reyx, D ;
Brosse, JC .
JOURNAL OF APPLIED POLYMER SCIENCE, 2003, 89 (05) :1291-1299
[2]  
Audic JL, 2001, J APPL POLYM SCI, V79, P1384, DOI 10.1002/1097-4628(20010222)79:8<1384::AID-APP50>3.0.CO
[3]  
2-H
[4]   Properties of thermoplastic blends: starch-polycaprolactone [J].
Averous, L ;
Moro, L ;
Dole, P ;
Fringant, C .
POLYMER, 2000, 41 (11) :4157-4167
[5]  
Chiu FC, 2000, POLYM INT, V49, P223, DOI 10.1002/(SICI)1097-0126(200002)49:2<223::AID-PI345>3.0.CO
[6]  
2-U
[7]   Hyperbranched poly(ε-caprolactone) as a nonmigrating alternative plasticizer for phthalates in flexible PVC [J].
Choi, Jeongsoo ;
Kwak, Seung-Yeop .
ENVIRONMENTAL SCIENCE & TECHNOLOGY, 2007, 41 (10) :3763-3768
[8]   Polycaprolactone-poly(ethylene glycol) multiblock copolymers as potential substitutes for di(ethylhexyl) phthalate in flexible poly(vinyl chloride) formulations [J].
Ferruti, P ;
Mancin, I ;
Ranucci, E ;
De Felice, C ;
Latini, G ;
Laus, M .
BIOMACROMOLECULES, 2003, 4 (01) :181-188
[9]   Characterization of 1,5-Pentanediol Dibenzoate as a Potential "Green" Plasticizer for Poly(vinyl chloride) [J].
Firlotte, Nicolas ;
Cooper, David G. ;
Maric, Milan ;
Nicell, James A. .
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 2009, 15 (02) :99-107
[10]  
Gartshore J, 2003, ENVIRON TOXICOL CHEM, V22, P1244, DOI 10.1897/1551-5028(2003)022<1244:BOPBRR>2.0.CO