Zero dynamics-based design of damping networks for switching converters

被引：32

作者：

Calvente, J ^{[1
]}

Martínez-Salamero, L ^{[1
]}

Garcés, P ^{[1
]}

Romero, A ^{[1
]}

机构：

[1] Univ Rovira & Virgili, Dept Engn Elect Elect & Automat, Tarragona 43007, Spain

来源：

IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS | 2003年 / 39卷 / 04期

关键词：

Switching converters;

D O I：

10.1109/TAES.2003.1261129

中图分类号：

V [航空、航天];

学科分类号：

08 ; 0825 ;

摘要：

A new design technique of the input filter damping network for dc-to-dc switching converters of buck type is presented. This technique is derived by means of zero dynamics analysis of the switching converter and yields equivalent results to those obtained using the classical approach based on minimizing the filter output impedance. The new method can be applied in converters of buck type with two inductors, boost with two inductors and dual SEPIC. Simulation and experimental results corresponding to a boost converter with two inductors illustrate the procedure.

引用

页码：1292 / 1303

页数：12

共 12 条

[1] Calvente J, 2001, IEEE POWER ELECTRON, P1994, DOI 10.1109/PESC.2001.954414
[2] CALVENTE J, 2001, THESIS
[3] Erich S. Y., 1992, IEEE Transactions on Power Electronics, V7, P143, DOI 10.1109/63.124587
[4] Jang Y., 1992, IEEE Transactions on Power Electronics, V7, P725, DOI 10.1109/63.163651
[5] INPUT-FILTER DESIGN FOR SWITCHING REGULATORS
LEE, FC
YU, Y
[J]. IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS, 1979, 15 (05) : 627 - 634
[6] Marino R., 1995, NONLINEAR CONTROL DE
[7] MARTINEZ L, 1993, IEEE POWER ELECTRON, P197, DOI 10.1109/PESC.1993.472082
[8] Middlebrook R.D., 1976, PROC IEEE IND APPL S, P366
[9] MIDDLEBROOK RD, 1981, POWERCON, V6
[10] MIDDLEBROOK RD, 1981, POWERCON NAT SOL STA

← 1 2 →