Thermal fatigue of DEMO first wall due to pulsed operation

被引：1

作者：

Vizvary, Zsolt ^{[1
]}

Karditsas, Panos ^{[1
]}

机构：

[1] EURATOM CCFE Fus Assoc, Culham Sci Ctr, Abingdon OX14 3DB, Oxon, England

来源：

FUSION ENGINEERING AND DESIGN | 2011年 / 86卷 / 9-11期

基金：

英国工程与自然科学研究理事会; 欧盟地平线“2020”;

关键词：

DEMO; First wall; Fatigue; Pulsed operation; BLANKET; DESIGN;

D O I：

10.1016/j.fusengdes.2011.01.061

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

The effect of pulsing on the first wall of a future fusion power plant is manifested mainly as thermal fatigue of the structure. Due to pulsing the temperature cycles result in varying stress in the first wall which is lifetime limiting as opposed to a steady-state mode where the number of heat-up-cool-down cycles is negligible. A series of analyses have been carried out on a "generic" DEMO outboard first wall using different parameters. The estimated lifetime from thermal fatigue point of view has been calculated. Both water and helium cooling have been considered. The effect of wall thickness between the channels and the front face as well as the coolant inlet temperature has been investigated and compared for both coolants. (C) 2011 EURATOM. Published by Elsevier B.V. All rights reserved.

引用

页码：1587 / 1590

页数：4

共 50 条

[1] DEMO First Wall misalignment study
Vizvary, Z.
Arter, W.
Barrett, T. R.
Calleja, D.
Firdaous, M.
Gerardin, J.
Kovari, M.
Maviglia, F.
Richiusa, M. L.
FUSION ENGINEERING AND DESIGN, 2019, 146 : 2577 - 2580
[2] Stress and fatigue in the magnets in DEMO in pulsed and steady-state operation using geometric scaling factors
Kovari, Michael
FUSION ENGINEERING AND DESIGN, 2011, 86 (9-11) : 2713 - 2716
[3] Impact of plasma thermal transients on the design of the EU DEMO first wall protection
Maviglia, Francesco
Bachmann, Christian
Federici, Gianfranco
Franke, Thomas
Siccinio, Mattia
Vorpahl, Christian
Albanese, Raffaele
Ambrosino, Roberto
Fable, Emiliano
Firdaouss, Mehdi
Gerardin, Jonathan
Loschiavo, Vincenzo Paolo
Mattei, Massimiliano
Palermo, Francesco
Richiusa, Maria Lorena
Villone, Fabio
Vizvary, Zsolt
FUSION ENGINEERING AND DESIGN, 2020, 158
[4] Simulation of Heat Flux to the DEMO First Wall Due to Filamentary Transport in the Far SOL
Pestchanyi, S.
IEEE TRANSACTIONS ON PLASMA SCIENCE, 2018, 46 (05) : 1393 - 1397
[5] Preliminary estimates of tritium permeation and retention in the first wall of DEMO due to ion bombardment
Arredondo, R.
Schmid, K.
Subba, F.
Spagnuolo, G. A.
NUCLEAR MATERIALS AND ENERGY, 2021, 28
[6] Crack propagation in first wall by thermal fatigue and creep
Kikuchi, K
Ue, K
Kudo, Y
Saito, M
FUSION ENGINEERING AND DESIGN, 2000, 49-50 : 229 - 234
[7] Thermal-hydraulic study on rib and dimple structures for cooling the First Wall of DEMO
Ruck, Sebastian
Arbeiter, Frederik
Brenneis, Bjoern
Hernandez, Francisco
Neuberger, Heiko
Schwab, Florian
FUSION ENGINEERING AND DESIGN, 2019, 146 : 2144 - 2148
[8] Thermal shock and thermal fatigue of ferroelectric thin film due to pulsed laser heating
Zheng, X. J.
Deng, S. F.
Zhou, Y. C.
Noda, N.
MACRO-, MESO-, MICRO- AND NANO-MECHANCIS OF MATERIALS, 2005, 9 : 69 - 78
[9] An assessment for the erosion rate of DEMO first wall
Tokar, M. Z.
NUCLEAR FUSION, 2018, 58 (01)
[10] Radiative heat load distribution on the EU-DEMO first wall due to mitigated disruptions
Moscheni, M.
Carr, M.
Dulla, S.
Maviglia, F.
Meakins, A.
Nallo, G. F.
Subba, F.
Zanino, R.
NUCLEAR MATERIALS AND ENERGY, 2020, 25

← 1 2 3 4 5 →