Effect of brittleness on the micromechanical damage and failure pattern of rock specimens

被引：7

作者：

Imani, Mehrdad ^{[1
]}

Nejati, Hamid Reza ^{[1
]}

Goshtasbi, Kamran ^{[1
]}

Nazerigivi, Amin ^{[1
]}

机构：

[1] Tarbiat Modares Univ, Sch Engn, Rock Mech Div, Tehran, Iran

来源：

SMART STRUCTURES AND SYSTEMS | 2022年 / 29卷 / 04期

关键词：

acoustic emission; brittleness; failure pattern; micro-crack; spalling; splitting; FRACTURE PROPAGATION; DYNAMIC-BEHAVIOR; PARTICLE MODEL; COALESCENCE; MECHANISM; STRESS; INDEX; SIMULATION; SANDSTONE; TBM;

D O I：

10.12989/sss.2022.29.4.535

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Failure patterns of rock specimens represent valuable information about the mechanical properties and crack evolution mechanism of rock. Several kinds of research have been conducted regarding the failure mechanism of brittle material, however; the influence of brittleness on the failure mechanism of rock specimens has not been precisely considered. In the present study, experimental and numerical examinations have been made to evaluate the physical and mechanical phenomena associated with rock failure mechanisms through the uniaxial compression test. In the experimental part, Unconfined Compressive Strength (UCS) tests equipped with Acoustic Emission (AE) have been conducted on rock samples with three different brittleness. Then, the numerical models have been calibrated based on experimental test results for further investigation and comparing the micro-cracking process in experimental and numerical models. It can be perceived that the failure mode of specimens with high brittleness is tensile axial splitting, based on the experimental evidence of rock specimens with different brittleness. Also, the crack growth mechanism of the rock specimens with various brittleness using discrete element modeling in the numerical part suggested that the specimens with more brittleness contain more tensile fracture during the loading sequences.

引用

页码：535 / 547

页数：13

共 65 条

[1] Acoustic signature of different fracture modes in marble and cementitious materials under flexural load
Aggelis, D. G.
Mpalaskas, A. C.
Matikas, T. E.
[J]. MECHANICS RESEARCH COMMUNICATIONS, 2013, 47 : 39 - 43
[2] Acoustic emission characterization of the fracture process in fibre reinforced concrete
Aggelis, D. G.
Soulioti, D. V.
Sapouridis, N.
Barkoula, N. M.
Paipetis, A. S.
Matikas, I. E.
[J]. CONSTRUCTION AND BUILDING MATERIALS, 2011, 25 (11) : 4126 - 4131
[3] Altindag R., 2000, P 5 NAT ROCK MECH S, P105
[4] [Anonymous], 1963, P 5 S ROCK MECH U MI
[5] [Anonymous], 1968, Fracture
[6] Rock failure modes under uniaxial compression, Brazilian, and point load tests
Basu, A.
Mishra, D. A.
Roychowdhury, K.
[J]. BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT, 2013, 72 (3-4) : 457 - 475
[7] Bieniawski Z.T., 1967, INT J ROCK MECH MIN, V4, P407, DOI [10.1016/0148-9062(67)90031-9, DOI 10.1016/0148-9062(67)90031-9]
[8] Blindheim O.T, 1998, PUBLICATIONS, P29
[9] Fracture coalescence in rock-type materials under uniaxial and biaxial compression
Bobet, A
Einstein, HH
[J]. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 1998, 35 (07): : 863 - 888
[10] Brown ET, 1981, SUGGESTED METHODS RO, P211

← 1 2 3 4 5 6 7 →