Bulk glassy and quasicrystalline (Zr65Al7.5Cu27.5)100-xTix alloys and their mechanical properties

被引:4
作者
Qiang, J. B. [1 ]
Zhang, W. [1 ]
Xie, G. Q. [1 ]
Inoue, A. [1 ]
机构
[1] Tohoku Univ, Inst Mat Res, Sendai, Miyagi 9808577, Japan
关键词
metallic glasses; quasicrystals; glass forming ability; fracture;
D O I
10.2320/matertrans.MJ200760
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The glass-forming ability (GFA) and thermal stability of (Zr65Al7.5Cu27.5)(100-x)Ti-x (x = 0 similar to 15; in at%) alloys have been investigated. It was revealed that a certain amount of Ti addition could improve the GFA of Zr65Al7.5Cu27.5 alloy effectively. The best bulk metallic glass (BMG) forming composition was found at (Zr65Al7.5Cu27.5)(93)Ti-7. Bulk glassy samples with diameter of 7 mm were made by means of copper mold casting. Further Ti additions deteriorated GFA and led to the precipitation of icosahedral phase, and 3 mm quasicrystalline cylinder was obtained at (Zr65Al7.5Cu27.5)(90)Ti-10. Room temperature compression testing showed that the quasicrystalline alloy had a fracture strength of 1875 MPa, being 300 MPa larger than that of the (Zr65Al7.5Cu27.5)(93)Ti-7 monolithic BMG.
引用
收藏
页码:1789 / 1792
页数:4
相关论文
共 18 条
[1]  
DAVIES HA, 1978, RAPIDLY QUENCHED MET, V3, P1
[2]   SUPERCOOLING OF LIQUIDS [J].
FRANK, FC .
PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1952, 215 (1120) :43-46
[3]   Stabilization of metallic supercooled liquid and bulk amorphous alloys [J].
Inoue, A .
ACTA MATERIALIA, 2000, 48 (01) :279-306
[4]   RETRACTED: Ductile quasicrystalline alloys (Retracted Article) [J].
Inoue, A ;
Zhang, T ;
Chen, MW ;
Sakurai, T ;
Saida, J ;
Matsushita, M .
APPLIED PHYSICS LETTERS, 2000, 76 (08) :967-969
[5]   Bulk glass-forming metallic alloys: Science and technology [J].
Johnson, WL .
MRS BULLETIN, 1999, 24 (10) :42-56
[6]   Crystallization of liquids and glasses to quasicrystals [J].
Kelton, KF .
JOURNAL OF NON-CRYSTALLINE SOLIDS, 2004, 334 :253-258
[7]   Formation of quasicrystals in bulk glass forming Zr-Cu-Ni-Al alloys [J].
Koster, U ;
Meinhardt, J ;
Roos, S ;
Liebertz, H .
APPLIED PHYSICS LETTERS, 1996, 69 (02) :179-181
[8]   Role of minor alloying additions in formation of bulk metallic glasses: A review [J].
Lu, ZP ;
Liu, CT .
JOURNAL OF MATERIALS SCIENCE, 2004, 39 (12) :3965-3974
[9]   A new glass-forming ability criterion for bulk metallic glasses [J].
Lu, ZP ;
Liu, CT .
ACTA MATERIALIA, 2002, 50 (13) :3501-3512
[10]   The correlation between reduced glass transition temperature and glass forming ability of bulk metallic glasses [J].
Lu, ZP ;
Tan, H ;
Li, Y ;
Ng, SC .
SCRIPTA MATERIALIA, 2000, 42 (07) :667-673