Thermo-physical Properties of Ti-coated Diamond/Al Composites Prepared by Pressure Infiltration

被引：22

作者：

Zhang, Yang ^{[1
]}

Wang, Xitao ^{[1
]}

Jiang, Senbao ^{[1
]}

Wu, Jianhua ^{[1
]}

机构：

[1] Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 100083, Peoples R China

来源：

PRICM 7, PTS 1-3 | 2010年 / 654-656卷

关键词：

Diamond/Al composites; Ti-coated diamond; thermo-physical properties;

D O I：

10.4028/www.scientific.net/MSF.654-656.2572

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Thermo-physical properties of diamond reinforced Al composites were investigated. Volume fraction of diamond particles was up to 55%. In order to improve the interfacial bonding between diamond and aluminum, diamond particles were pre-coated with titanium using molten salt method. XRD and SEM observation showed that the Ti coating on diamond consists of carbide layer and metal layer, which mainly depend on temperature and time. The influences of the Ti coating on interfacial characteristic and the thermo-physical properties of the composites were studied. The interfacial characterization and thermal diffusivity measurements indicated that Ti coated diamond was more favorable on interfacial bonding and thermal properties. Ti coating on diamond resulted in an increase of thermal conductivity of the composites, from 200 to 430 W/mK along with a coefficient of thermal expansion of 6.40 x 10(-6)/K.

引用

页码：2572 / 2575

页数：4

共 5 条

[1]

Clyne T.W., 1993, INTRO METAL MATRIX C

[2] Fabrication and characterization of diamond/copper composites for thermal management substrate applications [J].

Sun, Q ;

Inal, OT .

MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 1996, 41 (02) :261-266

[3] Assessing predictive schemes for thermal conductivity against diamond-reinforced silver matrix composites at intermediate phase contrast [J].

Tavangar, R. ;

Molina, J. M. ;

Weber, L. .

SCRIPTA MATERIALIA, 2007, 56 (05) :357-360

[4] Thermo-physical and mechanical properties of high volume fraction SiCp/Cu composites prepared by pressureless infiltration [J].

Zhang, L. ;

Qu, X. H. ;

He, X. B. ;

Duan, B. H. ;

Ren, S. B. ;

Qin, M. L. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 489 (1-2) :285-293

[5] Effect of aluminum addition on thermal properties of Mg/SiCP composites [J].

Zhang, Yang ;

Wang, Xitao ;

Chen, Li ;

He, Xinbo .

PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3, 2007, 561-565 :765-768

← 1 →