The effect of temper on the first breakdown in AA7075

被引:19
|
作者
Zhao, Zhijun [1 ]
Frankel, G. S. [1 ]
机构
[1] Ohio State Univ, Dept Mat Sci & Engn, Fontana Corros Ctr, Columbus, OH 43210 USA
关键词
al alloy; localized corrosion; polishing efrects;
D O I
10.1016/j.corsci.2007.02.004
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The first breakdown mechanism of AA7075 was studied by an in situ observation system in which a combination of a magnified image of the surface with the instantaneous polarization curve allowed determination of the corrosion process as a function of potential. In particular, the effect of alloy temper was examined. Underaged samples behaved in a similar fashion as the peak aged samples described previously; they exhibited surface layer dissolution associated with a transient current peak at lower potentials than required for initiation of stable localized corrosion and Zn rich bands were found in the near surface region. Surface layer dissolution and the transient current peak were not observed for samples in the solutionized + quenched condition because no comparable Zn enriched bands were present and the composition of the surface layer was not substantially different than the bulk matrix. Overaged samples also exhibited no layer attack and only one breakdown potential. Zn-rich bands were observed at the nano-grain boundaries for the overaged temper, but the localized attack propagated into the bulk matrix rather than laterally as layer attack. (C) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码:3089 / 3111
页数:23
相关论文
共 50 条
  • [1] Effect of temper on the distribution of pits in AA7075 alloys
    Dey, Swapna
    Gunjan, Manoj K.
    Chattoraj, Indranil
    CORROSION SCIENCE, 2008, 50 (10) : 2895 - 2901
  • [2] Comparative Analysis in Drilling Performance of AA7075 in Different Temper Conditions
    Yarar, Eser
    Erturk, A. Tamer
    Koc, Funda Gul
    Vatansever, Fahri
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (17) : 7721 - 7736
  • [3] Comparative Analysis in Drilling Performance of AA7075 in Different Temper Conditions
    Eser Yarar
    A. Tamer Ertürk
    Funda Gül Koç
    Fahri Vatansever
    Journal of Materials Engineering and Performance, 2023, 32 : 7721 - 7736
  • [4] Erosive Wear Behavior of Forged AA7075 under Different Temper Conditions
    Ersin Asım Güven
    Journal of Materials Engineering and Performance, 2024, 33 : 442 - 450
  • [5] Erosive Wear Behavior of Forged AA7075 under Different Temper Conditions
    Guven, Ersin Asim
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (01) : 442 - 450
  • [6] INVESTIGATION OF THE EFFECT OF TEMPER CONDITION ON THE FRICTION-STIR WELDABILITY OF AA7075 Al-ALLOY PLATES
    Ipekoglu, Guven
    Kiral, Binnur Goren
    Erim, Secil
    Cam, Gurel
    MATERIALI IN TEHNOLOGIJE, 2012, 46 (06): : 627 - 632
  • [7] The effect of inhibitor structure on the corrosion of AA2024 and AA7075
    Harvey, T. G.
    Hardin, S. G.
    Hughes, A. E.
    Muster, T. H.
    White, P. A.
    Markley, T. A.
    Corrigan, P. A.
    Mardel, J.
    Garcia, S. J.
    Mol, J. M. C.
    Glenn, A. M.
    CORROSION SCIENCE, 2011, 53 (06) : 2184 - 2190
  • [8] Antibacterial effect of PEO coating with silver on AA7075
    Cerchier, P.
    Pezzato, L.
    Brunelli, K.
    Dolcet, P.
    Bartolozzi, A.
    Bertani, R.
    Dabala, M.
    MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2017, 75 : 554 - 564
  • [9] On the first breakdown in AA7075-T6
    Zhao, Zhijun
    Frankel, G. S.
    CORROSION SCIENCE, 2007, 49 (07) : 3064 - 3088
  • [10] Investigation into Heat Treatment and Residual Stress in Laser Clad AA7075 Powder on AA7075 Substrate
    Cottam R.
    Luzin V.
    Liu Q.
    Wong Y.C.
    Wang J.
    Brandt M.
    Metallography, Microstructure, and Analysis, 2013, 2 (04) : 205 - 212