Unconventional electro-Fenton process operating at a wide pH range with Ni foam cathode and tripolyphosphate electrolyte

We propose an unconventional electro-Fenton (EF) system with a nickel-foam (Ni-F) cathode and tripolyphosphate (3-PP) electrolyte at near-neutral pH (EF/Ni-F-3-PP) to overcome pH restrictions in EF while preventing Ni-F corrosion. Response surface modelling was used to optimize the main operating parameters with a model prediction analysis (R-2 = 0.99): pH = 5.8, Fe2+ = 3.0 mM and applied current = 349.6 mA. Among the three variables, the pH exerted the highest influence on the process. Under optimal conditions, 100 % of phenol removal was achieved in 25 min with a pseudo-first-order apparent rate constant (k(app)) of 0.2 min(-1), 3.2-fold higher than the k(app) of EF/Ni-F with SO42- electrolyte at pH 3. A mineralization yield of 81.5 % was attained after 2 h; furthermore, it was found that 3-PP enhanced H2O2 accumulation by preventing bulk H2O2 decomposition. Finally, toxicity evaluation revealed the formation of toxic by-products at the early stages of treatment, which were totally depleted after 2 h, demonstrating the detoxifying capacity of the system. In conclusion, this study shows for the first time the potential of Ni-F as a cathode for EF under near-neutral conditions, rendered possible by the 3PP electrolyte. Under these conditions, the Ni-F corrosion issue could be alleviated.