Simultaneous measurements of thickness and temperature profile of the lubricant film at chip-tool interface during machining process using luminescent sensors

被引：11

作者：

Huang, Chih-Yung ^{[1
]}

Murthy, Tejas G. ^{[2
]}

Chandrasekar, Srinivasan ^{[3
]}

机构：

[1] Natl Tsing Hua Univ, Dept Power Mech Engn, Hsinchu 30013, Taiwan

[2] Indian Inst Sci, Dept Civil Engn, Bangalore 560012, Karnataka, India

[3] Purdue Univ, Sch Ind Engn, W Lafayette, IN 47907 USA

来源：

37TH NATIONAL CONFERENCE ON THEORETICAL AND APPLIED MECHANICS (37TH NCTAM 2013) & THE 1ST INTERNATIONAL CONFERENCE ON MECHANICS (1ST ICM) | 2014年 / 79卷

关键词：

luminescent sensor; lubrication; machining; temperature; film thicknes;

D O I：

10.1016/j.proeng.2014.06.303

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Simultaneous measurements of thickness and temperature profile of the lubricant film at chip-tool interface during machining have been studied in this experimental programme. Conventional techniques such as thermography can only provide temperature measurement under controlled environment in a laboratory and without the addition of lubricant. The present study builds on the capabilities of luminescent sensors in addition to direct image based observations of the chip-tool interface. A suite of experiments conducted using different types of sensors are reported in this paper, especially noteworthy are concomitant measures of thickness and temperature of the lubricant. (C) 2014 Elsevier Ltd.

引用

页码：9 / 16

页数：8

共 8 条

[1]

Boothroyd G., 1963, P I MECH ENG, V177, P789, DOI [DOI 10.1243/PIME_PROC_1963_177_058_02, 10.1243/PIMEPROC196317705802]

[2] Temperature rise in severe plastic deformation of titanium at small strain-rates [J].

Huang, C. ;

Murthy, T. G. ;

Shankar, M. R. ;

M'Saoubi, R. ;

Chandrasekar, S. .

SCRIPTA MATERIALIA, 2008, 58 (08) :663-666

[3] The application of temperature-sensitive paints for surface and fluid temperature measurements in both thermal developing and fully developed regions of a microchannel [J].

Huang, Chih-Yung ;

Li, Chen-An ;

Wang, Hsiang-Yu ;

Liou, Tong-Miin .

JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2013, 23 (03)

[4] In situ measurement of fluid film thickness in machining [J].

Huang, Chihyung ;

Lee, Seongeyl ;

Sullivan, John P. ;

Chandrasekar, Srinivasan .

TRIBOLOGY LETTERS, 2007, 28 (01) :39-44

[5] Measurement of temperature field in surface grinding using infra-red (IR) imaging system [J].

Hwang, JH ;

Kompella, S ;

Chandrasekar, S ;

Farris, TN .

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2003, 125 (02) :377-383

[6]

Liu T., 2004, PRESSURE TEMPERATURE

[7]

Liu T., 1997, Appl. Mech. Rev, V50, P227, DOI DOI 10.1115/1.3101703

[8]

Narayanan V., 2001, ASME INT MECH ENG C

← 1 →