Dynamic fragmentation and spheroidization of α phase grains during hot deformation of Ti-6Al-4V alloy

被引：9

作者：

Motyka, Maciej ^{[1
]}

Sieniawski, Jan ^{[1
]}

Ziaja, Waldemar ^{[1
]}

Mroczka, Malwina ^{[1
]}

Brylinski, Mateusz ^{[1
]}

机构：

[1] Rzeszow Univ Technol, Fac Mech Engn & Aeronaut, Dept Mat Sci, Al Powstancow Warszawy 12, PL-35959 Rzeszow, Poland

来源：

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH | 2018年 / 109卷 / 08期

关键词：

Two-phase titanium alloys; Hot deformation; Microstructure; Fragmentation and spheroidization of alpha phase grains; Superplasticity; LAMELLAR MICROSTRUCTURE; STATIC GLOBULARIZATION; MECHANISMS; SUPERPLASTICITY; KINETICS; WORKING;

D O I：

10.3139/146.111660

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Development of mechanical properties of titanium alloys is usually achieved by the control of their microstructure (globular, lamellar, bimodal). Dynamic fragmentation and spheroidization of elongated alpha phase grains, formed from martensite laths, in the microstructure of Ti-6Al-4V alloy are considered in the paper. The effects of alpha phase grain spheroidization was evaluated in tensile tests over a temperature range of 800-900 degrees C and strain rate range of 10(-3) - 10(-2) s(-1). Completed spheroidization of elongated alpha phase grains and subsequent growth of equiaxed grains for all deformation modes were found. A low value of apparent activation energy for deformation was calculated - suggesting grain boundary sliding was the main deformation mechanism. The results showed good correlation with the kinetic rate equation based on the Zener-Hollomon parameter.

引用

页码：685 / 693

页数：9

共 23 条

[21] The kinetics of static globularization of Ti-6Al-4V [J].

Stefansson, N ;

Semiatin, SL ;

Eylon, D .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (11) :3527-3534

[22] MODIFICATION OF ALPHA MORPHOLOGY IN TI-6AL-4V BY THERMOMECHANICAL PROCESSING [J].

WEISS, I ;

FROES, FH ;

EYLON, D ;

WELSCH, GE .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1986, 17 (11) :1935-1947

[23] Spheroidization of the lamellar microstructure in Ti-6Al-4V alloy during warm deformation and annealing [J].

Zherebtsov, S. ;

Murzinova, M. ;

Salishchev, A. ;

Sennatin, S. L. .

ACTA MATERIALIA, 2011, 59 (10) :4138-4150

← 1 2 3 →