RETRACTED: Effect of laser remelting on the mechanical behaviour of Inconel 625 cold-sprayed coatings (Retracted Article)

被引：13

作者：

Poza, P. ^{[1
]}

Munez, C. J. ^{[1
]}

Garrido, M. A. ^{[1
]}

Vezzu, S. ^{[2
]}

Rech, S. ^{[2
]}

Trentin, A. ^{[2
]}

机构：

[1] Univ Rey Juan Carlos, Dept Ciencia & Ingn Mat, Escuela Super Ciencias Expt & Tecnol, C Tulipan S-N, Mostoles 28933, Madrid, Spain

[2] Assoc Civen Ind, I-30157 Marghera, Italy

来源：

11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11) | 2011年 / 10卷

关键词：

cold spray; laser treatment; depth sensing indentation (nanoindentation); SEM;

D O I：

10.1016/j.proeng.2011.06.002

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Ni based coatings are being used to protect metallic engineering components in extreme conditions. Cold gas dynamic spray, or simply cold spray, is receiving increased attention during the last years because of the lower spraying temperature required to deposit metallic coatings. Further improvements in the coatings' performance could be attained by laser glazing to enhance coating adhesion and oxidation resistance. For these reasons, the aim of this work is to analyse the viability of cold spray to process Inconel 625 coatings and to evaluate the effect of laser remelting on their mechanical properties. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of ICM11

引用

页码：3799 / 3804

页数：6

共 9 条

[1] The effects of microstructural features on the performance gap in corrosion resistance between bulk and HVOF sprayed Inconel 625 [J].

Ahmed, N. ;

Bakare, M. S. ;

McCartney, D. G. ;

Voisey, K. T. .

SURFACE & COATINGS TECHNOLOGY, 2010, 204 (14) :2294-2301

[2] High-temperature oxidation studies of cold-sprayed Ni-20Cr and Ni-50Cr coatings on SAE 213-T22 boiler steel [J].

Bala, Niraj ;

Singh, Harpreet ;

Prakash, Satya .

APPLIED SURFACE SCIENCE, 2009, 255 (15) :6862-6869

[3] A comparison between the corrosion resistances of some HVOF-sprayed metal alloy coatings [J].

Bolelli, Giovanni ;

Lusvarghi, Luca ;

Giovanardi, Roberto .

SURFACE & COATINGS TECHNOLOGY, 2008, 202 (19) :4793-4809

[4] Indentation size effect in polycrystalline FCC metals [J].

Elmustafa, AA ;

Stone, DS .

ACTA MATERIALIA, 2002, 50 (14) :3641-3650

[5]

Li XD, 2002, MATER CHARACT, V48, P11, DOI 10.1016/S1044-5803(02)00192-4

[6] AN IMPROVED TECHNIQUE FOR DETERMINING HARDNESS AND ELASTIC-MODULUS USING LOAD AND DISPLACEMENT SENSING INDENTATION EXPERIMENTS [J].

OLIVER, WC ;

PHARR, GM .

JOURNAL OF MATERIALS RESEARCH, 1992, 7 (06) :1564-1583

[7]

Papyrin A, 2007, WOODHEAD PUBL MATER, P11, DOI 10.1533/9781845693787.1.11

[8] Role of thermal spray processing method on the microstructure, residual stress and properties of coatings: an integrated study for Ni-5 wt.%Al bond coats [J].

Sampath, S ;

Jiang, XY ;

Matejicek, J ;

Prchlik, L ;

Kulkarni, A ;

Vaidya, A .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 364 (1-2) :216-231

[9] Laser-assisted spraying and laser treatment of thermally sprayed coatings [J].

Suutala, Jyrki ;

Tuominen, Jari ;

Vuoristo, Petri .

SURFACE & COATINGS TECHNOLOGY, 2006, 201 (05) :1981-1987

← 1 →