Effect of V on the Precipitation Behavior of Ti-Mo Microalloyed High-Strength Steel

被引:13
作者
Han, Ruyang [1 ]
Yang, Gengwei [1 ]
Xu, Deming [1 ]
Jiang, Lu [2 ]
Fu, Zhixiang [1 ]
Zhao, Gang [1 ]
机构
[1] Wuhan Univ Sci & Technol, State Key Lab Refractories & Met, Wuhan 430081, Peoples R China
[2] Deakin Univ, Inst Frontier Mat Geelong, Waurn Ponds, Vic 3216, Australia
关键词
high-strength ferritic steel; Ti-Mo-V complex microalloying; thermodynamics of precipitation; kinetics for precipitation; precipitation behavior; MECHANICAL-PROPERTIES; INTERPHASE PRECIPITATION; MICROSTRUCTURAL EVOLUTION; ROLLING TEMPERATURE; NB; MOLYBDENUM; TITANIUM; VANADIUM; FERRITE; SHEET;
D O I
10.3390/ma15175965
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
In this work, the precipitates in Ti-Mo-V steel were systematically characterized by high-resolution transmission electron microscopy (HRTEM). The thermodynamics and kinetics of precipitates in Ti-Mo and Ti-Mo-V steels were theoretically analyzed, and the effect of vanadium on the precipitation behavior was clarified. The results showed that the precipitation volume fraction of the Ti-Mo-V steel was significantly higher than that of Ti-Mo steel. The randomly dispersed precipitation and interphase precipitation (Ti, Mo, V)C particles coexisted in the Ti-Mo-V steel. When the temperature was higher than 872 degrees C, the addition of vanadium could increase the driving force for (Ti, Mo, V)C precipitation in austenite, resulting in an increased nucleation rate and shortened incubation period, promoting the (Ti, Mo, V)C precipitation. When the temperature was lower than 872 degrees C, the driving force for (Ti, Mo, V)C precipitation in austenite was lower than that for (Ti, Mo)C precipitation, and the incubation period of (Ti, Mo, V)C precipitation was increased. Moreover, it was also found that the precipitated-time-temperature curve of (Ti, Mo, V)C precipitated in the ferrite region was "C" shaped, but that of (Ti, Mo)C was "epsilon" shaped, and the incubation period of (Ti, Mo, V)C was significantly shorter than that of (Ti, Mo)C.
引用
收藏
页数:12
相关论文
共 29 条
[1]   Influence of cooling rate on the precipitation behavior in Ti-Nb-Mo microalloyed steels during continuous cooling and relationship to strength [J].
Bu, F. Z. ;
Wang, X. M. ;
Chen, L. ;
Yang, S. W. ;
Shang, C. J. ;
Misra, R. D. K. .
MATERIALS CHARACTERIZATION, 2015, 102 :146-155
[2]   The effects of a ferritic or martensitic matrix on the tensile behavior of a nano-precipitation strengthened ultra-low carbon Ti-Mo-Nb steel [J].
Cai, Minghui ;
Chen, Liugu ;
Fang, Kai ;
Huang, Hongshou ;
Hodgson, Peter .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 801
[3]   Strain-induced precipitation in Ti microalloyed steel by two-stage controlled rolling process [J].
Chen, Songjun ;
Li, Liejun ;
Peng, Zhengwu ;
Huo, Xiangdong ;
Gao, Jixiang .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (06) :15759-15770
[4]   Influence of coiling temperature on microstructure and mechanical properties of a hot-rolled high-strength steel microalloyed with Ti, Mo and V [J].
Fu, Zhi-xiang ;
Yang, Geng-wei ;
Han, Ru-yang ;
Xu, Yao-wen ;
Mao, Xin-ping ;
Bao, Si-qian ;
Zhao, Gang .
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2022, 29 (03) :484-493
[5]   Development of high strength hot-rolled sheet steel consisting of ferrite and nanometer-sized carbides [J].
Funakawa, Y ;
Shiozaki, T ;
Tomita, K ;
Yamamoto, T ;
Maeda, E .
ISIJ INTERNATIONAL, 2004, 44 (11) :1945-1951
[6]   Effect of Vanadium on the Phase Transformation Behavior of Ti-Mo Microalloyed Ultra-High Strength Steel [J].
Gan, Xiaolong ;
Yang, Gengwei ;
Zhao, Gang ;
Mao, Xinping ;
Huang, Huihui ;
Xu, Guang .
STEEL RESEARCH INTERNATIONAL, 2018, 89 (09)
[7]   The effect of molybdenum on interphase precipitation and microstructures in microalloyed steels containing titanium and vanadium [J].
Gong, P. ;
Liu, X. G. ;
Rijkenberg, A. ;
Rainforth, W. M. .
ACTA MATERIALIA, 2018, 161 :374-387
[8]   Effect of Nb on the Continuous Cooling Transformation Rule and Microstructure, Mechanical Properties of Ti-Mo Bearing Microalloyed Steel [J].
He Xianling ;
Yang Gengwei ;
Mao Xinping ;
Yu Chibin ;
Da Chuanli ;
Gan Xiaolong .
ACTA METALLURGICA SINICA, 2017, 53 (06) :648-656
[9]   Effect of microalloying with molybdenum and boron on the microstructure and mechanical properties of ultra-low-C Ti bearing steel [J].
Hu, Jun ;
Du, Lin-Xiu ;
Ma, Ya-Na ;
Sun, Guo-Sheng ;
Xie, Hui ;
Misra, R. D. K. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 640 :259-266
[10]   Effect of Nb on the microstructure and properties of Ti-Mo microalloyed high-strength ferritic steel [J].
Huang, Huihui ;
Yang, Gengwei ;
Zhao, Gang ;
Mao, Xinping ;
Gan, Xiaolong ;
Yin, Qilong ;
Yi, Hang .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 736 :148-155