Use of New Green Bitumen Modifier for Asphalt Mixtures Recycling

被引:15
作者
Malinowski, Szymon [1 ]
Wrobel, Michal [1 ]
Bandura, Lidia [1 ]
Woszuk, Agnieszka [1 ]
Franus, Wojciech [1 ]
机构
[1] Lublin Univ Technol, Fac Civil Engn & Architecture, Dept Construct Mat Engn & Geoengn, Nadbystrzycka 40, PL-20618 Lublin, Poland
关键词
asphalt; biopolymer; asphalt mix; reclaimed asphalt pavement; sodium alginate; RHEOLOGICAL PROPERTIES; MECHANICAL-PROPERTIES; ALGINATE; BINDERS; BEHAVIOR; WASTE; REJUVENATORS;
D O I
10.3390/ma15176070
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Nowadays, an increasing amount of reclaimed asphalt pavement (RAP) is being produced from the reconstruction and/or modernisation of asphalt pavements. It is necessary to recycle the obtained RAP according to principles of sustainable development. Therefore, this work includes the design of asphalt mixtures containing RAP with bio-derived modifier and evaluates their performance properties. Crosslinked sodium alginate was applied for bitumen modification. The studies were carried out for four different modifier contents, i.e., 1.0%, 2.5%, 4.0% and 5.5%, with and without crosslinking agent. On the basis of the binder test results, the optimal amount of the additive was found to be 2.5%. The nanostructure analysis for the base and modified binders indicated a dual crosslinked biopolymer effect. As a result of the bee structure size decrease, the binder softening effect was observed. The asphalt mix properties showed that application of biopolymer-modified binder is fully justified due to the functional parameters of the mixture, especially the increased resistance to water and frost by about 9%.
引用
收藏
页数:15
相关论文
共 50 条
  • [31] Building Sustainable Pavements: Investigating the Effectiveness of Recycled Tire Rubber as a Modifier in Asphalt Mixtures
    Plati, Christina
    Cliatt, Brad
    ENERGIES, 2021, 14 (21)
  • [32] Toughening of brittle epoxy using bitumen as a new modifier
    Zavareh, Siamak
    Vahdat, Ghader
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2012, 31 (04) : 247 - 258
  • [33] Recycling waste disposable medical masks in improving the performance of asphalt and asphalt mixtures
    Zhao, Zenggang
    Wu, Shaopeng
    Liu, Quantao
    Xie, Jun
    Yang, Chao
    Wang, Fusong
    Wan, Pei
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 337
  • [34] Effect of nanowollastonite wastes on the bitumen properties and the performance of hot asphalt mixtures
    Anaei, Hasan Mohammadi
    Khabiri, Mohammad Mehdi
    Mansourian, Ahmad
    NANOMATERIALS AND ENERGY, 2024, 13 (02)
  • [35] Engineering characterization of recycled asphalt concrete and aged bitumen mixed recycling agent
    J. S. Chen
    C. C. Huang
    P. Y. Chu
    K. Y. Lin
    Journal of Materials Science, 2007, 42 : 9867 - 9876
  • [36] Engineering characterization of recycled asphalt concrete and aged bitumen mixed recycling agent
    Chen, J. S.
    Huang, C. C.
    Chu, P. Y.
    Lin, K. Y.
    JOURNAL OF MATERIALS SCIENCE, 2007, 42 (23) : 9867 - 9876
  • [37] Microscopic analysis of the interaction between crumb rubber and bitumen in asphalt mixtures using the dry process
    Javier Lopez-Moro, Francisco
    Candelas Moro, Maria
    Hernandez-Olivares, Francisco
    Witoszek-Schultz, Bernabe
    Alonso-Fernandez, Manuel
    CONSTRUCTION AND BUILDING MATERIALS, 2013, 48 : 691 - 699
  • [38] Results of surface hot-in place recycling (remix) of modified and alternative asphalt mixtures in Finland. Part II: bitumen scale
    Castillo, Daniel
    Falchetto, Augusto Cannone
    Korkiala-Tanttu, Leena
    INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 2022, 24 (02)
  • [39] A Review of the Utilisation of Recycled Waste Material as an Alternative Modifier in Asphalt Mixtures
    Milad, Abdalrhman
    Ali, Ahmed Suliman B.
    Yusoff, Nur Izzi Md
    CIVIL ENGINEERING JOURNAL-TEHRAN, 2020, 6 : 42 - 60
  • [40] A review of design methods for cold in-place recycling asphalt mixtures: Design processes, key parameters, and evaluation
    Liu, Ziming
    Sun, Lijun
    Zhai, Jiahui
    Huang, Weiqi
    JOURNAL OF CLEANER PRODUCTION, 2022, 370