Model for Listeria monocytogenes inactivation on dry-cured ham by high hydrostatic pressure processing

The aim of the work was to develop and validate a model of the inactivation of Listeria monocytogenes on dry-cured ham by high hydrostatic pressure (HHP) processing, as a function of the technological parameters: intensity, length and fluid temperature. Dry-cured ham inoculated with L monocytogenes was treated at different HHP conditions (at 347-852 MPa: for 2.3 to 15.75 min; at 7.6 to 24.4 degrees C) following a central composite design. Bacterial inactivation was assessed in terms of logarithmic reductions of L. monocytogenes counts on selective media. According to the best fitting and most significant polynomial equation, pressure and time were the most important factors determining the inactivation extent. The significance of the quadratic term of pressure and time indicated that little effect was observed below 450 MPa, whereas holding time longer than 10 min did not result in a meaningful reduction of L. monocytogenes counts. Temperature did not show significant influence at the range assayed. The model was validated with results obtained from further experiments and bibliographical data within the range of the experimental domain. The accuracy factor and bias factor were within the proposed acceptable values indicating the suitability of the model for predictive purposes, such as prediction of the process criteria to meet the Food Safety Objectives. The results of this work may help food processors to select optimum processing conditions of HHP. (C) 2010 Elsevier Ltd. All rights reserved.