Influences of the quantity of Mg2Sn phase on the corrosion behavior of Mg-7Sn magnesium alloy

被引:138
作者
Liu, Xianbin [1 ]
Shan, Dayong [1 ]
Song, Yingwei [1 ]
Chen, Rongshi [1 ]
Han, Enhou [1 ]
机构
[1] Chinese Acad Sci, Inst Met Res, State Key Lab Corros & Protect, Shenyang 110016, Liaoning, Peoples R China
关键词
Mg2Sn phase; Mg-7Sn alloy; Corrosion mode; Solution temperature; Stannic oxide; SN; AZ91; MICROSTRUCTURE; ZN;
D O I
10.1016/j.electacta.2010.12.030
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
The influence of the quantity of the Mg2Sn phase on the corrosion behavior of different solution temperature treated Mg-7Sn magnesium alloy has been investigated by electrochemical measurements, scanning electron microscope (SEM) observation, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis. With the increase of solution temperature, the quantity of Mg2Sn phase decreased and the tin concentration of matrix increased. The dissolved tin in Mg matrix took part in the film formation and the constituent of film was magnesium oxide and stannic oxide. The corrosion mode and corrosion rate were associated with the quantity of Mg2Sn phases and tin concentration of the matrix. If most of tin was present as Mg2Sn, the corrosion mode was pitting corrosion and it accelerated the corrosion rate. If most of tin was dissolved in matrix, the corrosion mode was filiform corrosion and it decreased the corrosion rate. The experiment evidences demonstrated that the corrosion resistance can be improved by increasing the tin concentration of matrix and the lowest corrosion rate was observed for sample solution treated at 540 degrees C. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:2582 / 2590
页数:9
相关论文
共 23 条
  • [1] Microstructure and corrosion behavior of Mg-Sn-Ca alloys after extrusion
    Abu Leil, T.
    Hort, N.
    Dietzel, W.
    Blawert, C.
    Huang, Y.
    Kainer, K. U.
    Rao, K. P.
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2009, 19 (01) : 40 - 44
  • [2] [Anonymous], CHEM NUCL MAT
  • [3] In situ observation of pit initiation of passivated AZ91 magnesium alloy
    Chen, Jian
    Wang, Jianqiu
    Han, En-Hou
    Ke, Wei
    [J]. CORROSION SCIENCE, 2009, 51 (03) : 477 - 484
  • [4] Effect of magnesium hydride on the corrosion behavior of an AZ91 magnesium alloy in sodium chloride solution
    Chen, Jian
    Dong, Junhua
    Wang, Jianqiu
    Han, Enhou
    Ke, Wei
    [J]. CORROSION SCIENCE, 2008, 50 (12) : 3610 - 3614
  • [5] Microstructure and mechanical properties of binary Mg-Sn alloys subjected to indirect extrusion
    Cheng, W. L.
    Park, S. S.
    You, B. S.
    Koo, B. H.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (18-19): : 4650 - 4653
  • [6] Comparison of corrosion behaviors of AZ31, AZ91, AM60 and ZK60 magnesium alloys
    Cheng Ying-liang
    Qin Ting-wei
    Wang Hui-min
    Zhang Zhao
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2009, 19 (03) : 517 - 524
  • [7] Improvement in stannate chemical conversion coatings on AZ91 D magnesium alloy using the potentiostatic technique
    Elsentriecy, Hassan H.
    Azumi, Kazuhisa
    Konno, Hidetaka
    [J]. ELECTROCHIMICA ACTA, 2007, 53 (02) : 1006 - 1012
  • [8] Correlation between the surface chemistry and the atmospheric corrosion of AZ31, AZ80 and AZ91D magnesium alloys
    Feliu, S., Jr.
    Pardo, A.
    Merino, M. C.
    Coy, A. E.
    Viejo, F.
    Arrabal, R.
    [J]. APPLIED SURFACE SCIENCE, 2009, 255 (07) : 4102 - 4108
  • [9] Microstructural investigations of the Mg-Sn-xCa system
    Hort, Norbert
    Huang, Ybanding
    Abu Leil, Torek
    Maier, Petra
    Kainer, Karl Ulrich
    [J]. ADVANCED ENGINEERING MATERIALS, 2006, 8 (05) : 359 - 364
  • [10] Li M.S., 2001, High Temperature Corrosion of Metal [M]