Rheological Properties of Styrene-Butadiene-Styrene Asphalt Mastic Containing High Elastic Polymer and Snow Melting Salt

Sprinkled snow melting salt (SMS) exerts a snow melting effect and also has a negative impact on the asphalt pavement and the environment. Salt storage pavement technology can alleviate these two problems. However, non-alkaline SMSs may have the risk of affecting asphalt mastic properties and further affecting the mechanical properties of asphalt pavements. Therefore, the general properties and rheological properties of two styrene-butadiene-styrene-modified asphalts with and without high elastic polymer were studied after adding SMS. The asphalt mastic without a high elastic agent is defined as the SBS group, and the other group is the HEA group. Our results show that the HEA group shows a lower penetration and a higher softening point, ductility, and viscosity than the SBS group. The more the SMS, the more the reduction effect of the general performance. The elastic recovery of asphalt mastic decreases with the content of SMS. SMS has no obvious effect on the ratio of the viscous and elastic composition of asphalt mastic. The creep of asphalt mastic increases with the content of SMS. The high elastic polymer can significantly reduce the creep, and even the strain of HEA100 is smaller than that of SBS00. SMS increases the creep stiffness and reduces the creep rate at low temperature. Although SMS increases the potential of asphalt pavement to melt ice and snow, it also reduces the high-temperature rutting resistance and low-temperature crack resistance of asphalt mastic. Salt storage pavement materials can be used in combination with high elastic polymers to reduce the negative effects brought by SMSs.