Pyro-EHD ink-jet printing for direct functionalization of 3D lab-on-chip devices

被引：4
|
作者：
Coppola, S. [1 ]
Vespini, V. [1 ]
Bianco, V. [1 ]
Mecozzi, L. [1 ]
Olivieri, F. [1 ]
Todino, M. [1 ]
Paturzo, M. [1 ]
Grilli, S. [1 ]
Ferraro, P. [1 ]
机构：
[1] Italian Natl Res Council ISASI CNR, Inst Appl Sci & Intelligent Syst, Via Campi Flegrei 34, I-80078 Pozzuoli, NA, Italy
来源：
MICROFLUIDICS, BIOMEMS, AND MEDICAL MICROSYSTEMS XIV | 2016年 / 9705卷
关键词：
(220.3630) Lenses; (220.4610) Optical fabrication; (230.3990) Micro-optical devices (100.3175) Interferometric imaging; (090.1995) Digital holography; MICROLENS; FABRICATION; PATTERNS; ARRAY;
D O I：
10.1117/12.2216682
中图分类号：
R318 [生物医学工程];
学科分类号：
0831 ;
摘要：
A challenging request in the fabrication of microfluidics and biomedical microsystems is a flexible ink-jet printing for breaking the rigidity of classical lithography. A pyroelectric-EHD system is presented. The system has proved challenging spatial resolution down to nanoscale, printing of high ordered patterns, capability of dispensing bio-ink as DNA and protein array for biosensing fabrication, single cells printing and direct printing of nanoparticles. With the method proposed high viscous polymers could be easily printed at high resolution in 2D or in 3D configuration. The pyro-EHD process has been proved for the fabrication of biodegradable microneedles for trasndermal drug delivery and 3D optical waveguides.
引用
收藏
页数：9
相关论文
共 50 条
  • [41] Simplified 3D hydrodynamic flow focusing for lab-on-chip single particle study
    Filippo Storti
    Silvio Bonfadini
    Luigino Criante
    Scientific Reports, 13
  • [42] Fabrication of 3D fine scale PZT components by ink-jet prototyping process
    Noguera, R
    Dossou-Yovo, C
    Lejeune, M
    Chartier, T
    JOURNAL DE PHYSIQUE IV, 2005, 128 : 87 - 93
  • [43] 3D fine scale ceramic components formed by ink-jet prototyping process
    Noguera, R
    Lejeune, M
    Chartier, T
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2005, 25 (12) : 2055 - 2059
  • [44] Engineering Novel Lab Devices Using 3D Printing and Microcontrollers
    Courtemanche, Jean
    King, Samson
    Bouck, David
    SLAS TECHNOLOGY, 2018, 23 (05): : 448 - 455
  • [45] Aerosol Jet Printing of 3D Pillar Arrays from Photopolymer Ink
    Vlnieska, Vitor
    Gilshtein, Evgeniia
    Kunka, Danays
    Heier, Jakob
    Romanyuk, Yaroslav E.
    POLYMERS, 2022, 14 (16)
  • [46] Direct ink write 3D printing of wave propagation sensor
    Hassan, Md Sahid
    Zaman, Saqlain
    Rodriguez, Aaron
    Molina, Laura
    Dominguez, Cesar Enrique
    Morgan, Robert
    Bernardin, John
    Lin, Yirong
    FLEXIBLE AND PRINTED ELECTRONICS, 2022, 7 (04):
  • [47] Direct Ink Writing: A 3D Printing Technology for Diverse Materials
    Saadi, M. A. S. R.
    Maguire, Alianna
    Pottackal, Neethu T.
    Thakur, Md Shajedul Hoque
    Ikram, Maruf Md
    Hart, A. John
    Ajayan, Pulickel M.
    Rahman, Muhammad M.
    ADVANCED MATERIALS, 2022, 34 (28)
  • [48] Assessment of Textile Material Properties and the Impact of Digital Ink-Jet Fabric Printing on 3D Simulation as a Sustainable Method for Garment Prototyping
    Petrak, Slavenka
    Naglic, Maja Mahnic
    Glogar, Martina
    Tomljenovic, Antoneta
    SUSTAINABILITY, 2025, 17 (04)
  • [49] Design of Continuous-Flow Lab-on-Chip with 3D Microfluidic Network for Sample Preparation
    Banerjee, Tapalina
    Poddar, Sudip
    Ghoshal, Sarmishtha
    Bhattacharya, Bhargab B.
    2019 32ND INTERNATIONAL CONFERENCE ON VLSI DESIGN AND 2019 18TH INTERNATIONAL CONFERENCE ON EMBEDDED SYSTEMS (VLSID), 2019, : 191 - 196
  • [50] Inkjet 3D printing - studies on applicability for lab-on-a-chip technique
    Walczak, Rafal
    Adamski, Krzysztof
    Pokrzywnicka, Aleksandra
    Kubicki, Wojciech
    PROCEEDINGS OF THE 30TH ANNIVERSARY EUROSENSORS CONFERENCE - EUROSENSORS 2016, 2016, 168 : 1362 - 1365
12345