Corrosion resistance of low-nickel duplex stainless steel rebars

被引：44
作者：
Bertolini, L. [1 ]
Gastaldi, M. [1 ]
机构：
[1] Politecn Milan, Dipartimento Chim Mat & Ingn Chim G Natta, I-20131 Milan, Italy
来源：
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION | 2011年 / 62卷 / 02期
关键词：
CONCRETE; BEHAVIOR;
D O I：
10.1002/maco.201005774
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The use of stainless steel bars in reinforced concrete structures may be an effective method to prevent corrosion in aggressive environments where high amounts of chlorides may penetrate in the concrete cover. For an estimation of the service life of structures where stainless steel bars are used, the chloride threshold for these rebars should be defined, and the influence of chemical composition and metallurgical factors that may affect the corrosion resistance (strengthening, welding, etc.) should be assessed. To reduce the cost of stainless steel reinforcement, duplex stainless steels with low nickel content have been recently proposed as an alternative to traditional austenitic steels, even though, few results are available regarding their corrosion performance in chloride contaminated concrete. This paper deals with the corrosion resistance of low-nickel duplex stainless steel rebars (1.4362 and 1.4162) as a function of the chloride content. Comparison is made with traditional austenitic steels. An attempt to define a chloride threshold for the different stainless steels is made by comparing the results of several test procedures both in concrete and in solution.
引用
收藏
页码：120 / 129
页数：10
相关论文
共 29 条
[1]   Analysis of the variability of chloride threshold values in the literature [J].
Alonso, M. C. ;
Sanchez, M. .
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2009, 60 (08) :631-637
[2]  
ANDRADE C, 1978, MATER CORROS, V29, P515, DOI DOI 10.1002/MAC0.19780290804
[3]  
BERGQUIST A, 2005, CORR 2005 NACE INT H
[4]   Depassivation of steel reinforcement in case of pitting corrosion: detection techniques for laboratory studies [J].
Bertolini, L. ;
Redaelli, E. .
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2009, 60 (08) :608-616
[5]  
Bertolini L, 1996, BRIT CORROS J, V31, P218
[6]  
Bertolini L, 2002, CORROS REV, V20, P129
[7]  
Bertolini L., 1998, INT C CORR REH REINF, P7
[8]  
Bertolini L., 2013, Corrosion of Steel in Concrete: Prevention,Diagnosis, Repair
[9]  
BERTOLINI L, 2000, ANN PROGR REP EUR CO, P27
[10]  
BERTOLINI L, 1998, 2 INT C CONCR SEV CO
123