Recent Advances on the Solidification Processing of Cast Energetic Materials

被引:0
|
作者
Mudryy, Ruslan [1 ]
Jia, Shian [2 ]
Nastac, Laurentiu [2 ]
机构
[1] US Army, RDECOM ARDEC, Armaments Engn & Technol Ctr, Picatilmy, NJ 07806 USA
[2] Univ Alabama, Dept Met & Mat Engn, Tuscaloosa, AL 35487 USA
来源
SHAPE CASTING | 2014年
关键词
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This paper investigates the solidification of highly viscous energetic materials cast into a projectile. Active cooling and heating (ACH) control solidification technology as well as mechanical vibration (MV) are applied to achieve unidirectional solidification and to reduce cracks, gas pores, and shrinkage defects and to decrease the detrimental gap size between the projectile and the solidified energetic material. A comprehensive numerical model was developed to simulate the solidification processes during casting of energetic materials, as well as the resulting induced thermal stresses. The optimized design parameters of the proposed technologies are developed based on numerical modeling and experiment work. A detailed comparison between the latest experiments performed at the University of Alabama, Solidification Laboratory, obtained with electrical heating and water cooling and with and without mechanical vibration is provided in this paper. In these experiments, a special wax material (e.g., Chlorez 700S) that has similar thermo-physical properties with the IMX-104 explosive material was used. Experiments performed at the USARMY ARDEC using the IMX-104 explosive material with steam heating and water cooling are also presented in this paper. These experiments are being used to further validate the numerical model.
引用
收藏
页码:67 / 74
页数:8
相关论文
共 50 条
  • [1] Recent advances on the crystallization engineering of energetic materials
    Zhang, Xue-Xue
    Yang, Zhi-Jian
    Nie, Fude
    Yan, Qi-Long
    ENERGETIC MATERIALS FRONTIERS, 2020, 1 (3-4): : 141 - 156
  • [2] Recent advances in the research of energetic materials abroad
    Li, Jinwei
    Guti Huojian Jishu/Journal of Solid Rocket Technology, 1995, 18 (01):
  • [3] Recent advances in the chemical conversion of energetic materials
    Mitchell, AR
    Coburn, MD
    Schmidt, RD
    Pagoria, PF
    Lee, GS
    COMBUSTION OF ENERGETIC MATERIALS, 2002, : 52 - 61
  • [4] RECENT ADVANCES IN ENERGETIC MATERIALS IN SWEDEN, ESPECIALLY AT THE FOI
    Janzon, Bo
    Ostmark, Henric
    INTERNATIONAL JOURNAL OF ENERGETIC MATERIALS AND CHEMICAL PROPULSION, 2011, 10 (03) : 187 - 215
  • [5] Recent Advances in Safe Synthesis of Energetic Materials: An Overview
    D. M. Badgujar
    M. B. Talawar
    V. E. Zarko
    P. P. Mahulikar
    Combustion, Explosion, and Shock Waves, 2019, 55 : 245 - 257
  • [6] Recent Advances in Safe Synthesis of Energetic Materials: An Overview
    Badgujar, D. M.
    Talawar, M. B.
    Zarko, V. E.
    Mahulikar, P. P.
    COMBUSTION EXPLOSION AND SHOCK WAVES, 2019, 55 (03) : 245 - 257
  • [7] Recent Advances on Thermal Safety Characterization of Energetic Materials
    Hsu, P. C.
    Strout, S. A.
    Klunder, G. L.
    Kahl, E. M.
    Muetterties, N. K.
    Reynolds, J. G.
    Gresshoff, M.
    SHOCK COMPRESSION OF CONDENSED MATTER - 2017, 2018, 1979
  • [8] RECENT ADVANCES IN THE ANALYSIS OF CAST IRON AND FOUNDRY MATERIALS
    CLARKE, WE
    ANALYTICAL CHEMISTRY, 1956, 28 (12) : 2025 - 2025
  • [9] Advances in Solidification Processing
    Lopez, Hugo F.
    METALS, 2015, 5 (03): : 1432 - 1434
  • [10] Advances in solidification processing
    Biswajit Basu
    Sadhana, 2001, 26 : 1 - 3