Effect of isothermal holding temperature on NGS kinetics of phosphorus and temper embrittlement

被引:0
|
作者
Wang, Jun [1 ]
Li, Qing-Fen [1 ]
Liu, Er-Bao [2 ]
机构
[1] Harbin Engn Univ, Coll Mech & Elect Engn, Harbin 150001, Peoples R China
[2] Harbin Engn Univ, Coll Mat Sci & Chem Engn, Harbin 150001, Peoples R China
来源
ADVANCES IN FRACTURE AND DAMAGE MECHANICS VI | 2007年 / 348-349卷
关键词
isothermal holding temperature; non-equilibrium grain boundary segregation (NGS); temper embrittlement; steel; 2.25Cr1Mo;
D O I
10.4028/www.scientific.net/KEM.348-349.549
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
When failure occurs in material, it is often occurs by fracture along some grain boundaries and often by the micro-segregation of embrittling impurity to the grain boundaries, In the present work, the non-equilibrium grain-boundary segregation (NGS) kinetics of phosphorus and the temper embrittlement at the same solution treatment and different isothermal holding temperature in steel 2.25Cr1Mo are studied. The NGS kinetics curves of phosphorus at the same solution temperature (1050 degrees C)and different isothermal holding temperature (540 degrees C and 600 degrees C) are given. Experimental results provide a direct evidence of NGS kinetic model and show that the grain boundary segregation concentrations of phosphorus for specimen isothermal holding at 540 degrees C are higher than those at 600 degrees C. The peak values of AES patterns of solute atoms for specimen isothermal holding at 540 degrees C are also higher than those at 600 degrees C. It is therefore concluded that the lower the isothermal holding temperature, the higher the segregation concentration of phosphorus at the grain-boundaries, and also the higher the degree of embrittlement.
引用
收藏
页码:549 / +
页数:2
相关论文
共 38 条
  • [31] Effect of structural imperfection on kinetics of alpha-gamma phase transformation in constructional steel near ac1 temperature
    Chashchukhina, TI
    Degtyarev, MV
    Voronova, LM
    Davydova, LS
    INTERNATIONAL WORKSHOP ON NONDESTRUCTIVE TESTING AND COMPUTER SIMULATIONS IN SCIENCE AND ENGINEERING, 1999, 3687 : 347 - 349
  • [32] Effect of Isothermal Heating Temperature on the Interfacial Reactions Between Fe-Al-Ca Alloy and Al2O3-CaO-FeO Oxide
    Liu, Chengsong
    Zhang, Hua
    Liu, Xiaoqin
    Ye, Fei
    JOM, 2019, 71 (05) : 1793 - 1802
  • [33] Effect of isothermal transformation temperature on amount of retained austenite and its thermal stability in a bainitic Fe-3%Si-0.45%C-X steel
    Lee, YK
    Shin, HC
    Jang, YC
    Kim, SH
    Choi, CS
    SCRIPTA MATERIALIA, 2002, 47 (12) : 805 - 809
  • [34] Effect of non-equilibrium grain-boundary segregation of phosphorus on the intermediate-temperature ductility minimum of an Fe-17Cr alloy
    Wang, Kai
    Yang, Chun
    Si, Hong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 587 : 228 - 232
  • [35] Ion nitriding of a face-centered cubic high-entropy alloy: Nitriding kinetics, the effect of temperature and contact stress on tribological behavior
    Yang, Rui
    Wang, Dian
    Liu, Dan
    Yang, Huijun
    Qiao, Junwei
    INTERMETALLICS, 2024, 172
  • [36] Effect of substrate temperature on the electrospark deposition, structure, and mechanical properties of coatings. I. Kinetics of substrate heating during electrospark deposition
    Belik, V. D.
    Litvin, R. V.
    Kovalchenko, M. S.
    POWDER METALLURGY AND METAL CERAMICS, 2012, 50 (11-12) : 698 - 703
  • [37] Effect of substrate temperature on the electrospark deposition, structure, and mechanical properties of coatings. I. Kinetics of substrate heating during electrospark deposition
    V. D. Belik
    R. V. Litvin
    M. S. Kovalchenko
    Powder Metallurgy and Metal Ceramics, 2012, 50 : 698 - 703
  • [38] Effect of CaCl2 Addition on Phosphorus Distribution Between CaO-SiO2-FeOx-P2O5 Slag and Carbon-Saturated Iron at Steelmaking Temperature
    Yan, Ziwen
    Deng, Zhiyin
    Zhu, Miaoyong
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2021, 52 (04): : 2806 - 2815