Effect of isothermal holding temperature on NGS kinetics of phosphorus and temper embrittlement

被引:0
|
作者
Wang, Jun [1 ]
Li, Qing-Fen [1 ]
Liu, Er-Bao [2 ]
机构
[1] Harbin Engn Univ, Coll Mech & Elect Engn, Harbin 150001, Peoples R China
[2] Harbin Engn Univ, Coll Mat Sci & Chem Engn, Harbin 150001, Peoples R China
来源
ADVANCES IN FRACTURE AND DAMAGE MECHANICS VI | 2007年 / 348-349卷
关键词
isothermal holding temperature; non-equilibrium grain boundary segregation (NGS); temper embrittlement; steel; 2.25Cr1Mo;
D O I
10.4028/www.scientific.net/KEM.348-349.549
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
When failure occurs in material, it is often occurs by fracture along some grain boundaries and often by the micro-segregation of embrittling impurity to the grain boundaries, In the present work, the non-equilibrium grain-boundary segregation (NGS) kinetics of phosphorus and the temper embrittlement at the same solution treatment and different isothermal holding temperature in steel 2.25Cr1Mo are studied. The NGS kinetics curves of phosphorus at the same solution temperature (1050 degrees C)and different isothermal holding temperature (540 degrees C and 600 degrees C) are given. Experimental results provide a direct evidence of NGS kinetic model and show that the grain boundary segregation concentrations of phosphorus for specimen isothermal holding at 540 degrees C are higher than those at 600 degrees C. The peak values of AES patterns of solute atoms for specimen isothermal holding at 540 degrees C are also higher than those at 600 degrees C. It is therefore concluded that the lower the isothermal holding temperature, the higher the segregation concentration of phosphorus at the grain-boundaries, and also the higher the degree of embrittlement.
引用
收藏
页码:549 / +
页数:2
相关论文
共 38 条
  • [21] Non-equilibrium phosphorus grain boundary segregation and its effect on embrittlement in a niobium-stabilized interstitial-free
    Song, S. -H.
    Zhao, Yu
    Si, Hong
    MATERIALS LETTERS, 2015, 140 : 20 - 22
  • [22] Effects of reheating temperature and isothermal holding time on the morphology and thixo-formability of SiC particles reinforced AZ91 magnesium matrix composite
    Yi, Yu-Shi
    Li, Rong-Fei
    Xie, Zong-Yao
    Meng, Yi
    Sugiyama, Sumio
    VACUUM, 2018, 154 : 177 - 185
  • [23] Effect of tempering temperature on mechanical properties and hydrogen embrittlement resistance of a dual-precipitation-hardened martensitic steel<break/>
    Chen, Weihao
    Li, Yu
    Wang, Binjun
    Xu, Chun
    Jia, Xiaoshuai
    PHILOSOPHICAL MAGAZINE, 2025, 105 (02) : 106 - 117
  • [24] Effect of heating temperature and holding time on microstructure and mechanical properties of quenched GCr15 bearing steel
    Ye, Guiyan
    Li, Yujun
    FUNCTIONAL MATERIALS, 2023, 30 (02): : 212 - 216
  • [25] The Effect of Applied Compression Stress on Isothermal Phase Transformation Kinetics and Transformation Plasticity of Bainite for HQ785 Steel
    Li, Weijuan
    Zhang, Shoubin
    SOFTWARE ENGINEERING AND KNOWLEDGE ENGINEERING: THEORY AND PRACTICE, VOL 1, 2012, 114 : 261 - +
  • [26] Effect of ausforming temperature and strain on the bainitic transformation kinetics of a low carbon boron steel
    He, B. B.
    Xu, W.
    Huang, M. X.
    PHILOSOPHICAL MAGAZINE, 2015, 95 (11) : 1150 - 1163
  • [27] Effect Of Phosphoric Acid Treatment On Isothermal High Temperature Oxidation Behaviour Of AISI 304 Stainless Steel at 800°C
    Riffard, F.
    Buscail, H.
    Rabaste, F.
    Issartel, C.
    Perrier, S.
    DIFFUSION IN MATERIALS - DIMAT 2011, 2012, 323-325 : 359 - 364
  • [28] Effect of phosphorus content on interfacial heat transfer and film deposition behavior during the high-temperature simulation of strip casting
    Wang, Wanlin
    Lu, Cheng
    Hao, Liang
    Zeng, Jie
    Zhou, Lejun
    Liu, Xinyuan
    Li, Xia
    Zhu, Chenyang
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2024, 31 (05) : 1016 - 1025
  • [29] Effect of joining temperature and holding time on microstructure and shear strength of Ti2AlC/Cu joints brazed using Ag-Cu filler alloy
    Zhang, J.
    Wang, G. C.
    Hea, Y. M.
    Sun, Y.
    He, X. D.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 567 : 58 - 64
  • [30] Effect of preheating/post-isothermal treatment temperature on microstructures and properties of cladding on U75V rail prepared by plasma cladding method
    Ding, Hui
    Dai, Jianwen
    Dai, Ting
    Sun, Yiwei
    Lu, Tao
    Li, Miao
    Jia, Xiaojian
    Huang, Daosi
    SURFACE & COATINGS TECHNOLOGY, 2020, 399 (399)