Role of pre-deformation in age hardening of a niobium-microalloyed steel

被引:1
|
作者
Yuan, ZX
Song, SH [1 ]
Liu, J
Weng, LQ
机构
[1] Wuhan Univ Sci & Technol, Sch Met & Mat, Wuhan 430081, Peoples R China
[2] Harbin Inst Technol, Shenzhen Grad Sch, Dept Mat Sci & Engn, Xili 518055, Shenzhen, Peoples R China
关键词
niobium; microalloyed steels; precipitation; dispersion strengthening; mechanical properties;
D O I
10.2355/isijinternational.45.388
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The effect of pre-deformation on the age hardening of a niobium-microalloyed steel is investigated by virtue of mechanical testing in conjunction with microstructural observations. The steel is aged at three temperatures 600 degrees C, 640 degrees C and 680 degrees C, respectively, after solution-treated at 1 200 degrees C. The precipitation of Nb(C, N) is markedly accelerated by a pre-deformation of 15 % prior to ageing, resulting in very fine particles being formed and a considerable increase in the strength of the steel with no large decrease in the ductility. Compared with the hot-rolled state, the yield strength of the deformed steel increases by about 280 MPa while that of the undeformed steel only by about 60MPa after peak-aged at 640 degrees C. Overall, the yield strength of the deformed steel may reach about 710 MPa with an elongation of about 19 %.
引用
收藏
页码:388 / 391
页数:4
相关论文
共 50 条
  • [41] Influence of Holding Time After Deformation on Bainite Transformation in Niobium Microalloyed Steel
    Hai-long Yi
    Lin-xiu Du
    Guo-dong Wang
    Xiang-hua Liu
    Journal of Iron and Steel Research International, 2007, 14 : 62 - 65
  • [42] Effects of deformation of austenite on bainite transformation in niobium microalloyed low carbon steel
    Yi, Hai-Long
    Du, Lin-Xiu
    Wang, Guo-Dong
    Liu, Xiang-Hua
    Cailiao Kexue yu Gongyi/Material Science and Technology, 2008, 16 (03): : 442 - 444
  • [43] The Deformation Behavior of Niobium Microalloyed Steel during Lüders Band Formation
    Brlic, Tin
    Rodic, Tomaz
    Samardzic, Ivan
    Marcius, Marijan
    Matvija, Milos
    Reskovic, Stoja
    METALS, 2023, 13 (10)
  • [44] Influence of Pre-Deformation on Springback Effect of Advanced High Strength Steel
    Chongthairungruang Bunyong
    Uthaisangsuk Vitoon
    Suranuntchai Surasak
    Jirathearanat Suwat
    Journal of Iron and Steel Research(International), 2011, 18 (S1) : 855 - 861
  • [45] Effect of Pre-deformation on Nanoscale Precipitation and Hardness of a Maraging Stainless Steel
    Zhou, Xinlei
    Wang, Bin
    Zeng, Tianyi
    Yan, Wei
    Luan, Junhua
    Wang, Wei
    Yang, Ke
    Jiao, Zengbao
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2022, 35 (12) : 2089 - 2100
  • [46] Effect of Pre-deformation on Nanoscale Precipitation and Hardness of a Maraging Stainless Steel
    Xinlei Zhou
    Bin Wang
    Tianyi Zeng
    Wei Yan
    Junhua Luan
    Wei Wang
    Ke Yang
    Zengbao Jiao
    Acta Metallurgica Sinica(English Letters), 2022, 35 (12) : 2089 - 2100
  • [47] Influence of Pre-Deformation on Springback Effect of Advanced High Strength Steel
    Bunyong, Chongthairungruang
    Vitoon, Uthaisangsuk
    Surasak, Suranuntchai
    Suwat, Jirathearanat
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2011, 18 : 855 - 861
  • [48] Effect of Pre-deformation on Nanoscale Precipitation and Hardness of a Maraging Stainless Steel
    Xinlei Zhou
    Bin Wang
    Tianyi Zeng
    Wei Yan
    Junhua Luan
    Wei Wang
    Ke Yang
    Zengbao Jiao
    Acta Metallurgica Sinica (English Letters), 2022, 35 : 2089 - 2100
  • [49] Effect of pre-deformation mode on the microstructures and mechanical properties of Hadfield steel
    Zhang, Fucheng
    Chen, Chen
    Lv, Bo
    Ma, Hua
    Farabi, Ehsan
    Beladi, Hossein
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 743 : 251 - 258
  • [50] Effect of pre-deformation on hot workability of super austenitic stainless steel
    Hu, Xin
    Wang, Zhuyu
    Wang, Lin
    Chen, Chen
    Zhang, Fucheng
    Zhang, Wei
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 16 : 238 - 250