Effects of separating characteristics in ultrasonic elliptical vibration-assisted milling on cutting force, chip, and surface morphologies

被引:30
作者
Han, Xiong [1 ,2 ]
Zhang, Deyuan [2 ]
机构
[1] AVIC Chengdu Aircraft Ind Grp Co Ltd, Chengdu 610091, Peoples R China
[2] Beihang Univ, Sch Mech Engn & Automat, Beijing 100191, Peoples R China
关键词
Ultrasonic elliptical vibration; Milling; Separating characteristic; Titanium alloys; REDUCTION;
D O I
10.1007/s00170-020-05463-y
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
Vibration-assisted cutting is considered a feasible way to cope with difficult-to-machine materials. Within the present paper, ultrasonic elliptical vibration-assisted milling (UEVM) is adopted to the machining of Ti-6Al-4V titanium alloy. Velocity coefficientKis introduced to describe the separating characteristic of the UEVM. Theoretical analysis of separating type and non-separating type cutting using the UEVM method is performed. Subsequently, experimental investigations of cutting force, chip formation, and surface morphology are conducted by comparing the UEVM with the conventional milling (CM). Results show that compared with non-separating type UEVM, separating type UEVM can bring more reduction of average radial cutting force and the chips are visibly thinner under the UEVM condition withK< 1 than those produced under CM condition using the same cutting parameters. However, the surface roughness in the UEVM is significantly larger than those in the CM due to the periodic motion component of the teeth of milling tool in the direction perpendicular to machining surface with the application of ultrasonic elliptical vibrations.
引用
收藏
页码:3075 / 3084
页数:10
相关论文
共 28 条
[1]   Improvements of machinability of aerospace-grade Inconel alloys with ultrasonically assisted hybrid machining [J].
Bai, Wei ;
Bisht, Anuj ;
Roy, Anish ;
Suwas, Satyam ;
Sun, Ronglei ;
Silberschmidt, Vadim V. .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 101 (5-8) :1143-1156
[2]   Using two-dimensional vibration cutting for micro-milling [J].
Chern, GL ;
Chang, YC .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (06) :659-666
[3]   Experimental study on machinability improvement of hardened tool steel using two dimensional vibration-assisted micro-end-milling [J].
Ding, Hui ;
Ibrahim, Rasidi ;
Cheng, Kai ;
Chen, Shi-Jin .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2010, 50 (12) :1115-1118
[4]   Experimental study on micromachining of CFRP/Ti stacks using micro ultrasonic machining process [J].
James, Sagil ;
Sonate, Abhishek .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (1-4) :1539-1547
[5]   Theoretical and experimental investigation of the frictional behavior of the tool-chip interface in ultrasonic-vibration assisted turning [J].
Jamshidi, H. ;
Nategh, M. J. .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2013, 65 :1-7
[6]  
[姜兴刚 Jiang Xinggang], 2014, [兵工学报, Acta Armamentarii], V35, P1891
[7]   Experimental study on surface generation in vibration-assisted micro-milling of glass [J].
Jin, Xiaoliang ;
Xie, Boyuan .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 81 (1-4) :507-512
[8]   Chatter Marks Reduction in Meso-Scale Milling through Ultrasonic Vibration Assistance Parallel to Tooling's Axis [J].
Ko, Jeong Hoon ;
Tan, Shao Wei .
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2013, 14 (01) :17-22
[9]   Cusp Error Reduction under High Speed Micro/Meso-Scale Milling with Ultrasonic Vibration Assistance [J].
Ko, Jeong Hoon ;
Shaw, Kah Chuan ;
Chua, Han Kwang ;
Lin, Rong Ming .
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2011, 12 (01) :15-20
[10]   Progressive tool failure in high-speed dry milling of Ti-6Al-4V alloy with coated carbide tools [J].
Li, Anhai ;
Zhao, Jun ;
Luo, Hanbing ;
Pei, Zhiqiang ;
Wang, Zeming .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 58 (5-8) :465-478