Iterative experimental/numerical procedure to design riveted joints for airframe crashworthiness

被引：0
|
作者：
Langrand, B [1 ]
Patronelli, L [1 ]
Deletombe, E [1 ]
机构：
[1] Off Natl Etud & Rech Aerosp, Dept Solid & Damage Mech, Lille, France
来源：
COMPUTATIONAL METHODS AND EXPERIMENTAL MEASUREMENTS X | 2001年 / 3卷
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper deals with an iterative experimental/numerical methodology to improve FE riveted joint models used in airframe crashworthiness studies. Standard and specific experiments are undertaken to measure the behaviour and the strain rate sensitivity of materials for rivets and structures. Material parameters are identified for elasto-viscoplastic and damage constitutive models. Standard and specific tests are carried out and modelled to analyse the material embrittlement coming from riveting process and the dynamic failure of riveted joints. A specific procedure is developed for identification of equivalent rivet model for structural crashworthiness. A new rivet model is developed to improve the representativeness of airframe FE model.
引用
收藏
页码：301 / 310
页数：10
相关论文
共 50 条
  • [21] DESIGN FOR MANUFACTURE - 4. DESIGN OF RIVETED JOINTS.
    Anon
    1600,
  • [22] Impact of the Manufacturing Process on the Flexural Properties of Laminated Composite-Metal Riveted Joints: Experimental and Numerical Studies
    Zeinedini, Afshin
    Hosseini, Yazdan
    Mahdi, Ahmed Sahib
    Akhavan-Safar, Alireza
    da Silva, Lucas F. M.
    APPLIED COMPOSITE MATERIALS, 2023, 31 (2) : 583 - 610
  • [23] DAMPING EFFECTS IN JOINTS AND EXPERIMENTAL TESTS ON RIVETED SPECIMENS.
    Crema, Luigi Ballis
    Castellani, Antonio
    Nappi, Alfonso
    AGARD Conference Proceedings, 1979, (277): : 1 - 12
  • [24] Impact of the Manufacturing Process on the Flexural Properties of Laminated Composite-Metal Riveted Joints: Experimental and Numerical Studies
    Afshin Zeinedini
    Yazdan Hosseini
    Ahmed Sahib Mahdi
    Alireza Akhavan-Safar
    Lucas F. M. da Silva
    Applied Composite Materials, 2024, 31 : 583 - 610
  • [25] An Experimental and Numerical Study of Repairs on Composite Substrates with Composite and Aluminum Doublers Using Riveted, Bonded, and Hybrid Joints
    Pitta, Siddharth
    Roure, Francesc
    Crespo, Daniel
    Rojas, Jose, I
    MATERIALS, 2019, 12 (18)
  • [26] Effect of Sheets' Thickness and Rivet Geometry on Mechanical Properties of Orbital Riveted Aluminium Joints: Experimental and Numerical Analysis
    Di Bella, Guido
    Calabrese, Luigi
    Borsellino, Chiara
    Alderucci, Tiziana
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2021, 5 (04):
  • [27] Riveted single lap joints .1. A numerical parametric study
    Fung, CP
    Smart, J
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 1997, 211 (G1) : 13 - 27
  • [28] An Iterative Design Procedure for Multiband Single-Layer Reflectarrays: Design and Experimental Validation
    Borgese, Michele
    Costa, Filippo
    Genovesi, Simone
    Monorchio, Agostino
    IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 2017, 65 (09) : 4595 - 4606
  • [29] Design and Numerical Modeling of a Pressurized Airframe Bulkhead Joint
    Giannopoulos, Ioannis K.
    Theotokoglou, Efstathios E.
    Zhang, Xiang
    JOURNAL OF AIRCRAFT, 2015, 52 (06): : 1729 - 1735
  • [30] Experimental and numerical investigation into tensile and cross tensile responses of CFRP/Al blind riveted-bonded hybrid joints
    Lu, Yu
    Liu, Qiang
    Zhang, Zengbo
    Qin, Liuye
    Li, Qing
    COMPOSITE STRUCTURES, 2023, 318
12345