Differential thermal analysis (DTA) on the reaction mechanism in Fe-Ti-B4C system

被引：22
|
作者：
Zhang, Zhiqiang
Shen, Ping
Jiang, Qichuan [1 ]
机构：
[1] Jilin Univ, Key Lab Automobile Mat, Minist Educ, Changchun 130025, Peoples R China
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2008年 / 463卷 / 1-2期
基金：
中国国家自然科学基金;
关键词：
intermetallics; precipitation; thermal analysis;
D O I：
10.1016/j.jallcom.2007.09.056
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Differential thermal analysis (DTA) was undertaken to determine the reaction mechanism in the Fe-Ti-B4C System under argon. When the mixtures were heated to about 786 degrees C, Fe2B and C appeared as a result of Fe reacting with B4C. As the temperature continued to increase, FeTi formed by an interdiffusion between Fe and Ti. When the mixtures were heated to 1089 degrees C, FeTi reacted with Ti, leading to the formation of a Fe-Ti melt, into which the displaced C and B from B4C dissolve, forming a Fe-Ti-C-B melt. Finally, when the concentration of C and B attained a certain value, Ti reacted with C and B, yielding TiC and TiB2 in the melt, and simultaneously considerable heat released. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：498 / 502
页数：5
相关论文
共 50 条
  • [1] Differential thermal analysis (DTA) on the reaction mechanism in Fe-Ti-B4C system
    Key Laboratory of Automobile Materials, Ministry of Education, Department of Materials Science and Engineering, No.5988 Renmin Street, Changchun, 130025, China
    Journal of Alloys and Compounds, 2008, 463 (1-2): : 498 - 502
  • [2] Interaction between Fe-Ti-B4C Powder Charge Components During Heating
    Goncharuk, D. A.
    Baglyuk, G. A.
    POWDER METALLURGY AND METAL CERAMICS, 2013, 51 (9-10) : 547 - 553
  • [3] A micro differential thermal analysis (μDTA) system
    Ruther, P
    Herrscher, M
    Paul, O
    MEMS 2004: 17TH IEEE INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS, TECHNICAL DIGEST, 2004, : 165 - 168
  • [4] Thermal explosion reaction in the Ti-B4C system in air
    Yang Y.F.
    Wang H.Y.
    Wang J.G.
    Jiang Q.C.
    J Mater Res, 2009, 9 (3003-3006): : 3003 - 3006
  • [5] Thermal explosion reaction in the Ti-B4C system in air
    Yang, Ya-Feng
    Wang, Hui-Yuan
    Wang, Jin-Guo
    Jiang, Qi-Chuan
    JOURNAL OF MATERIALS RESEARCH, 2009, 24 (09) : 3003 - 3006
  • [6] Variation in the particle size of FE-TI-B4C powders induced by high-voltage electrical discharge
    Sizonenko, O. N.
    Baglyuk, G. A.
    Raichenko, A. I.
    Taftai, E. I.
    Lipyan, E. V.
    Zaichenko, A. D.
    Torpakov, A. S.
    Guseva, E. V.
    POWDER METALLURGY AND METAL CERAMICS, 2012, 51 (3-4) : 129 - 136
  • [7] INSTALLATION FOR DIFFERENTIAL THERMAL-ANALYSIS DTA-4
    KOBYLKIN, AN
    MASLENKOV, SB
    NIKOLAEV, AG
    NAYASHKOV, BI
    INDUSTRIAL LABORATORY, 1982, 48 (04): : 376 - 379
  • [8] Preparation and mechanism of hollow ceramic microspheres based on Ti-B4C-C reaction system
    Wang, Jian-Jiang
    Wen, Jin-Hua
    Hu, Wen-Bin
    Lou, Hong-Fei
    Gongneng Cailiao/Journal of Functional Materials, 2010, 41 (05): : 787 - 790
  • [9] Effect of the Ti/B4C mole ratio on the reaction products and reaction mechanism in an Al-Ti-B4C powder mixture
    Zhang, Jingjing
    Lee, Jung-Moo
    Cho, Young-Hee
    Kim, Su-Hyeon
    Yu, Huashun
    MATERIALS CHEMISTRY AND PHYSICS, 2014, 147 (03) : 925 - 933
  • [10] Diffusion path and reaction mechanism between Ti and B4C
    Tang, JX
    Cheng, JH
    Zeng, ZQ
    Miao, HZ
    JOURNAL OF INORGANIC MATERIALS, 2000, 15 (05) : 884 - 888
12345