Numerical Die Life Estimation of a Crack Susceptible Industrial Hot Forging Process

被引：1

作者：

Bouguecha, A. ^{[1
]}

Behrens, B. -A. ^{[1
]}

Bonk, C. ^{[1
]}

Rosenbusch, D. ^{[1
]}

Kazhai, M. ^{[1
]}

机构：

[1] Inst Forming Technol & Machines IFUM Hannover, Univ 2, D-30823 Garbsen, Germany

来源：

PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) | 2017年 / 1896卷

关键词：

FEA; fatigue life; crack initiation; hot forging; die life estimation;

D O I：

10.1063/1.5008225

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In industrial hot forging processes, the forging dies underlie cyclic thermo-mechanical loads, which can lead to failure of the tools. Besides die wear (abrasive and adhesive) on the surface, fatigue crack initiation with a following fracture of the tool is one of the most frequent failures occurring in hot forging processes. In this study an industrial hot forging process is considered for fatigue analysis. Tool geometry is designed for a defined life time until crack initiated failure of the tool. Material characterization tests in form of tensile tests as well as cylindrical compression tests and low cycle fatigue tests were carried out. The data will be implemented in a commercial software-system to realize a qualitative good prediction of die life regarding crack wiation.

引用

页数：6

共 50 条

[41] Comparative Studies on Die Structure of Cold Forging Process Based on Fatigue Life Analysis [J].

Zhang, Yu ;

Yang, Lin ;

An, Zhi Guo .

FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY V, 2015, :963-968

[42] Influence of application of GN plus Cr/CrN hybrid layer on durability improvement of die inserts used in hot forging process of wheel forging [J].

Gronostajski, Zbigniew ;

Hawryluk, Marek ;

Widomski, Pawel ;

Polak, Slawomir ;

Ziemba, Jacek ;

Zwierzchowski, Maciej .

PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE ON METAL FORMING METAL FORMING 2018, 2018, 15 :396-403

[43] Case Study of the Effect of Precoating on the Decarburization of the Surface Layer of Forged Parts during the Hot Die Forging Process [J].

Widomski, Pawel ;

Zwierzchowski, Maciej ;

Barelkowski, Artur ;

Tympalski, Mateusz .

MATERIALS, 2021, 14 (02) :1-15

[44] Numerical Simulation of Coupled Thermo-mechanical Behavior of a Cylinder Billet during Hot-forging Process [J].

Peiran Ding Don gYing Ju Shoji Imatani Tatsuo Inoue Engineering Services Department MSC Japan Ltd Osaka Japan Department of Mechanical Engineering Saitama Institute of Technology Saitama Japan Department of Energy Conversion Science K .

JournalofShanghaiJiaotongUniversity, 2000, (01) :263-269

[45] Effects of Process Conditions on Crack Healing in 30Cr2Ni4MoV Steel during Hot Forging [J].

Zhang, Xiaoxun ;

Lin, Tuo ;

Zhu, Shuangshuang ;

Zhang, Shengling ;

Wang, Zhen ;

Ha, Lei .

FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 184-185 :854-857

[46] Quasi-industrial accelerated testing of a HIPIMS deposited nano-layered CrAlYN/CrN coating for improving hot forging die life of nitrided H13 steel [J].

Fleming, Christopher ;

Kerr, William ;

Krishnamurthy, Bhaskaran ;

Hall, Liza ;

Sugumaran, Arunprabhu ;

Ehiasarian, Arutiun ;

Hovsepian, Papken .

JOURNAL OF MANUFACTURING PROCESSES, 2025, 143 :132-150

[47] FEA Based Tool Life Quantity Estimation of Hot Forging Dies Under Cyclic Thermo-Mechanical Loads [J].

Behrens, B. -A. ;

Bouguecha, A. ;

Schaefer, F. ;

Hadifi, T. .

INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, 2010, 1315 :303-+

[48] Numerical and Experimental Study of an Industrial Case for Grain Size Evolution in Bainitic Steel in Controlled Hot Forging and its Influence on Mechanical Performance [J].

Ivaniski, T. M. ;

de Castro, P. J. ;

Rodrigues, D. ;

Epp, J. ;

Nunes, R. M. ;

Rocha, A. da S. .

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2022, 25

[49] Microstructure and hardness evaluation of Stellite 6 coating developed on hot forging die steel using gas tungsten arc cladding process [J].

Raj, Mathala Prithvi ;

Kumar, Manoj ;

Pramanick, Ajit Kumar .

MATERIALS TODAY-PROCEEDINGS, 2022, 66 :3718-3722

[50] Austenitic Grain Size Prediction in Hot Forging of a 20mncr5 Steel by Numerical Simulation Using the JMAK Model for Industrial Applications [J].

Ivaniski, Thiago Marques ;

Epp, Jeremy ;

Zoch, Hans-Werner ;

Rocha, Alexandre da Silva .

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2019, 22 (05)

← 1 2 3 4 5 →