Microstructural response of an Al-modified Ni-Cr-Fe ternary alloy during thermal processing

被引：12

作者：

Akinlade, D. A. ^{[1
]}

Caley, W. F. ^{[2
]}

Richards, N. L. ^{[1
]}

Chaturvedi, M. C. ^{[1
]}

机构：

[1] Univ Manitoba, Dept Mech & Mfg Engn, Winnipeg, MB, Canada

[2] Dalhousie Univ, Dept Prot Engn & Appl Sci, Halifax, NS, Canada

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 486卷 / 1-2期

关键词：

powder metallurgy; superalloys; microstructure; characterisation; alloy development; temperature-time transformation;

D O I：

10.1016/j.msea.2007.10.076

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A thermodynamic package was used to predict the phase transformations that occurred during thermal processing of a superalloy based on the composition of a ternary Ni-Cr-Fe alloy. The effect of the addition of 6 w/o Al on phase transformation in the material sintered were estimated and compared with results obtained experimentally by X-ray diffraction and metallography, while the transformation temperature of the modified alloy was corroborated by differential scanning calorimetry (DSC). Mechanical property of the alloy was estimated in terms of Vickers hardness. These results suggest that despite potential problems encountered in high-temperature powder processing of superalloys that often tend to influence the feasibility of using thermodynamic predictions to model such alloy systems, the software and predictions used in this study offer a way to simulate both design and characterisation of the experimental alloy. (c) 2007 Elsevier B.V. All rights reserved.

引用

页码：626 / 633

页数：8

共 14 条

[1]

AKINLADE DA, 2007, P 4 INT C EXH EM SOL

[2]

Akinlade DA, 2006, INT J POWDER METALL, V42, P43

[3]

ARENDT SA, 2005, ASTM STANDARDS B, V168, P145

[4]

BAKER H, 1992, ASM TERNARY PHASE DI, V3

[5]

BRANDES EA, 1999, SMITHELLS METAL REFE

[6] Calculating phase diagrams using PANDAT and PanEngine [J].

Chen, SL ;

Zhang, F ;

Daniel, S ;

Xie, FY ;

Yan, XY ;

Chang, YA ;

Schmid-Fetzer, R ;

Oates, WA .

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 2003, 55 (12) :48-51

[7]

HARDING RA, 1997, AFS T, V49, P451

[8]

Kaufman L., 1970, Computer calculation of phase diagrams

[9] DENSIFICATION MECHANISM MAPS FOR HOT ISOSTATIC PRESSING (HIP) OF UNEQUAL SIZED PARTICLES [J].

NAIR, SV ;

TIEN, JK .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1987, 18 (01) :97-107

[10]

Saunders N, 2004, SUPERALLOYS 2004, P849, DOI 10.7449/2004/Superalloys_2004_849_858

← 1 2 →