A novel model for predicting the effective specific heat capacity of molten salt doped with nanomaterial for solar energy application

In order to establish instructions for high-performance molten salt preparation, this paper focuses on accurate prediction method on the effective heat capacity of nanomaterial-enhanced molten salt (NMS). With carbon nanotube (CNT) enhanced carbonate eutectic (Li2CO3-K2CO3) taken as the study subject, the microscopic mechanism of nanomaterial on the effective specific heat capacity enhancement of molten salt is revealed. The nanolayer content is calculated, and the specific heat capacity of CNT and nanolayer is quantified. Accordingly, the effective heat capacity prediction model is completed. In addition, the CNT-enhanced carbonate eutectic is experimentally prepared with a high-energy ball milling method. Its effective specific heat capacity is measured and used to validate the prediction model. The results show that, firstly, the thickness of nanolayer is 0.65 nm and 0.98 nm in the single-walled CNT case and multi-walled CNT case, respectively. Secondly, the specific heat capacity of CNT is 1.613 J center dot g- 1 center dot K- 1 at 800 K, and the specific heat capacity of nanolayer increases with increasing the surface atom ratio. Finally, the effective specific heat capacity of CNT-enhanced carbonate salt is predicted and validated with experimental results. It is revealed that, in the cases of well-dispersed nanomaterial-enhanced molten salt, the prediction method presented in this research has considerable accuracy (error < 2.90%). Furthermore, the effective specific heat capacity of NMS doped with CNT of various diameter is given.