Analytical Solutions and Finite Element Modelling of Deep Drawing Process for Cylindrical Metal Cups

被引：1

作者：

Supasuthakul, Jeerachai ^{[1
]}

Hodgson, Peter Damien ^{[1
]}

Weiss, Matthias ^{[1
]}

Yang, Chunhui ^{[2
]}

机构：

[1] Deakin Univ, Ctr Mat & Fibre Innovat, Waurn Ponds, Vic 3217, Australia

[2] Deakin Univ, Sch Engn, Waurn Ponds, Vic 3217, Australia

来源：

ADVANCES IN MATERIALS PROCESSING IX | 2010年 / 443卷

关键词：

deep drawing; theoretical solution; finite element modeling; contact angle; cylindrical cups;

D O I：

10.4028/www.scientific.net/KEM.443.104

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Analytical modelling of deep drawing process is of value in preliminary process design to illustrate the influence of major variables including friction and strain hardening on punch loads, cup dimensions and process limits. In this study, analytical models including theoretical solution and a series of finite element models are developed to account for the influences of process parameters including friction coefficient, tooling geometry and material properties on deep drawing of metal cups. The accuracy of both the theoretical and finite element solutions is satisfactory compared with those from experimental work.

引用

页码：104 / +

页数：2

共 8 条

[1]

Chung S., 1951, Proceedings of the Institution of Mechanical Engineers, V165, P199, DOI [10.1243/PIMEPROC195116502102, DOI 10.1243/PIMEPROC195116502102]

[2]

Doege E, 2004, AIP CONF PROC, V712, P844, DOI 10.1063/1.1766632

[3]

Gharib H., 2006, J ACHIEV MAT MANUF E, V17, P245

[4]

HEERING C, 2003, PRACTICAL TRAINING D

[5]

HESSENBERG WC, 1954, SIMPLE ACCOUNT SWIFT

[6]

HILL R, 1950, MATH THEORY PLASTICI, P282

[7]

LANGE K, 1985, HDB METAL FORMING, pCH20

[8]

SLATER RAC, 1977, ENG PLASTICITY THEOR, P238

← 1 →