ENSURING THE ECONOMIC EFFICIENCY OF ENTERPRISES BY MULTI-CRITERIA SELECTION OF THE OPTIMAL MANUFACTURING PROCESS

被引：11

作者：

Kotliar, Alexey ^{[1
]}

Basova, Yevheniia ^{[1
]}

Ivanov, Vitalii ^{[2
]}

Murzabulatova, Olena ^{[3
]}

Vasyltsova, Svitlana ^{[4
]}

Litvynenko, Mariia ^{[4
]}

Zinchenko, Olena ^{[1
]}

机构：

[1] Natl Tech Univ, Kharkiv Polytech Inst, Inst Educ & Sci Mech Engn & Transport, Kharkiv, Ukraine

[2] Sumy State Univ, Fac Tech Syst & Energy Efficient Technol, Sumy, Ukraine

[3] KNURE, Fac Informat & Analyt Technol & Management, Dept Econ Cybernet & Management Econ Secur, Kharkiv, Ukraine

[4] Natl Tech Univ, Kharkiv Polytech Inst, Inst Educ & Sci Econ Management & Int Busines, Kharkiv, Ukraine

来源：

MANAGEMENT AND PRODUCTION ENGINEERING REVIEW | 2020年 / 11卷 / 01期

关键词：

Prismatic part; multiproduct manufacturing; machining; optimality criteria; optimization; shaping intensification; profit intensity; PARTS; TECHNOLOGY; SIMULATION; OPERATIONS;

D O I：

10.24425/mper.2020.132943

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Technological assurance and improvement of the economic efficiency of production are the first-priority issues for the modern manufacturing engineering area. It is possible to achieve a higher value of economic efficiency in multiproduct manufacturing by multicriteria optimization. A set of optimality criteria based on technological and economic indicators was defined with the aim of selecting the optimal manufacturing process. Competitive variants and a system of optimization were developed and investigated. A comparative analysis of the optimality criteria and their influence on the choice of optimal machining processes was carried out. It was determined that the batch of parts made an impact on the selection of the manufacturing process.

引用

页码：52 / 61

页数：10

共 32 条

[1]

Alekseeva M.M., 2001, BUSINESS PLANNING

[2]

Antuchev G.S., 1989, METHODS PARAMETRIC S

[3] Developing a New Integrated Bi-Objective Model for Buffer and Process Time Optimization Problem using Optimization via Simulation Approach [J].

Azimi P. ;

Farhadi N. .

Mathematical Models and Computer Simulations, 2018, 10 (3) :373-386

[4] Cloud-Enabled Product Design Selection and Manufacturing as a Service [J].

Babiceanu, Radu F. ;

Seker, Remzi .

SERVICE ORIENTED, HOLONIC AND MULTI-AGENT MANUFACTURING SYSTEMS FOR INDUSTRY OF THE FUTURE, 2020, 853 :210-219

[5]

Dobrotvorskiy S., 2018, Diagnostyka, V19, P37, DOI [10.29354/diag/93136, DOI 10.29354/DIAG/93136]

[6] Numerical Deflections Analysis of Variable Low Stiffness of Thin-Walled Parts During Milling [J].

Dobrotvorskiy, Sergey ;

Basova, Yevheniia ;

Kononenko, Serhii ;

Dobrovolska, Ludmila ;

Ivanova, Maryna .

ADVANCES IN DESIGN, SIMULATION AND MANUFACTURING II, 2020, :43-53

[7] Analysis of the Conditions for Effective Use of Numerically Controlled Machine Tools [J].

Hamrol, Adam ;

Zerbst, Slawomir ;

Bozek, Mariusz ;

Grabowska, Marta ;

Weber, Markus .

ADVANCES IN MANUFACTURING (MANUFACTURING 2017), 2018, :3-12

[8]

Hrinov Volodymyr, 2018, E3S Web of Conferences, V60, DOI 10.1051/e3sconf/20186000017

[9] Mathematical Modeling and Numerical Simulation of Fixtures for Fork-Type Parts Manufacturing [J].

Ivanov, Vitalii ;

Pavlenko, Ivan ;

Kuric, Ivan ;

Kosov, Mykyta .

INDUSTRY 4.0: TRENDS IN MANAGEMENT OF INTELLIGENT MANUFACTURING SYSTEMS, 2019, :133-142

[10] Technological Assurance and Features of Fork-Type Parts Machining [J].

Ivanov, Vitalii ;

Dehtiarov, Ivan ;

Pavlenko, Ivan ;

Kosov, Mykyta ;

Hatala, Michal .

ADVANCES IN DESIGN, SIMULATION AND MANUFACTURING II, 2020, :114-125

← 1 2 3 4 →