Influence of the solids content on the properties of waterborne polyurethane dispersions obtained with polycarbonate of hexanediol

被引:96
作者
Garcia-Pacios, Vanesa [1 ]
Iwata, Yoshiro [2 ]
Colera, Manuel [2 ]
Miguel Martin-Martinez, Jose [1 ]
机构
[1] Univ Alicante, Adhes & Adhes Lab, E-03080 Alicante, Spain
[2] SA Zona El Serrallo, UBE CHEM EUROPE, Grao 12100, Castellon, Spain
关键词
Polyurethane; Water based; Thermal analysis; Lap-shear; Peel; CHEMICAL-STRUCTURE; MOLECULAR-WEIGHT; SOFT SEGMENT; REACTION-KINETICS; ADHESIVES; SEPARATION; DIOLS;
D O I
10.1016/j.ijadhadh.2011.05.010
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Waterborne polyurethane adhesives are an interesting alternative to the current solvent-borne polyurethane adhesives used in the industry. Different aliphatic waterborne polyurethane dispersions (PUDs) with different solids content were synthesised by reacting isophorone diisocyanate (IPDI) with a polycarbonate derived from hexanediol via the acetone method. The PUDs were characterised by Brookfield viscosity, pH, particle size, transmission electron microscopy (TEM) and solids content measurement. The dry polyurethane films were characterised by ATR-IR spectroscopy, plate-plate rheology, differential scanning calorimetry (DSC) and thermal gravimetry (TGA). Their adhesion was evaluated from T-peel tests of flexible PVC/waterborne polyurethane dispersion/flexible PVC joints and single lap-shear tests of aluminium/waterborne polyurethane dispersion/aluminium joints. The PUDs showed bimodal particle size distribution. The mean particle size of the PUDs decreased by increasing their solids content but the particle size distribution of the PUDs increased by decreasing their solids content. As the solids content increased the Brookfield viscosity of the PUDs increased due to lower mean particle size where particle crowding was favoured, the PUD having 44 wt% solids content was an exception (higher particle size but lower polydispersity). On the other hand, the increase in the solids content increased the hard segments content and the degree of phase separation of the polyurethanes. The greater the solids content of the polyurethanes, the lower their glass transition temperatures values and the lower the elastic moduli. Adhesive strength under peel stresses were not affected by the solids content in the polyurethanes but the single lap-shear strength values decreased by increasing the solid contents in the polyurethanes due to lower hard segments content. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码:787 / 794
页数:8
相关论文
共 29 条
  • [1] d'Arias B.F., 2008, POLYM ENG SCI, V48, P519
  • [2] Synthesis and characterization of waterborne polyurethane adhesive from MDI and HDI
    Du, Hui
    Zhao, Yuhua
    Li, Qifeng
    Wang, Junwei
    Kang, Maoqing
    Wang, Xinkui
    Xiang, Hongwei
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 110 (03) : 1396 - 1402
  • [3] Structure-property relationships of thermoplastic polyurethane elastomers based on polycarbonate diols
    Eceiza, A.
    Larranaga, M.
    de la Caba, K.
    Kortaberria, G.
    Marieta, C.
    Corcuera, M. A.
    Mondragon, I.
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 108 (05) : 3092 - 3103
  • [4] Thermoplastic polyurethane elastomers based on polycarbonate diols with different soft segment molecular weight and chemical structure: Mechanical and thermal properties
    Eceiza, A.
    Martin, M. D.
    de la Caba, K.
    Kortaberria, G.
    Gabilondo, N.
    Corcuera, M. A.
    Mondragon, I.
    [J]. POLYMER ENGINEERING AND SCIENCE, 2008, 48 (02) : 297 - 306
  • [5] Influence of molecular weight and chemical structure of soft segment in reaction kinetics of polycarbonate diols with 4,4′-diphenylmethane diisocyanate
    Eceiza, A
    de la Caba, K
    Kortaberria, G
    Gabilondo, N
    Marieta, C
    Corcuera, MA
    Mondragon, I
    [J]. EUROPEAN POLYMER JOURNAL, 2005, 41 (12) : 3051 - 3059
  • [6] The influence of molecular weight and chemical structure of soft segment in reaction kinetics with tolyl isocyanate
    Eceiza, A
    de la Caba, K
    Gascón, V
    Corcuera, MA
    Mondragon, I
    [J]. EUROPEAN POLYMER JOURNAL, 2001, 37 (08) : 1685 - 1693
  • [7] Synthesis of Linear Aliphatic Polycarbonate Macroglycols Using Dimethylcarbonate
    Foy, Ernest
    Farrell, Joseph B.
    Higginbotham, Clement L.
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2009, 111 (01) : 217 - 227
  • [8] High solid and high performance UV cured waterborne polyurethanes
    Jung, Dong Hee
    Kim, Eun Young
    Kang, Young Soo
    Kim, Byung Kyu
    [J]. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2010, 370 (1-3) : 58 - 63
  • [9] Preparation and properties of transparent thermoplastic segmented polyurethanes derived from different polyols
    Lee, Da-Kong
    Tsai, Hong-Bing
    Tsai, Ruey-Shi
    Chen, Po Hung
    [J]. POLYMER ENGINEERING AND SCIENCE, 2007, 47 (05) : 695 - 701
  • [10] Aqueous polyurethane dispersions derived from polycarbonatediols and Di-(4-isocyanatocyclohexyl) methane
    Lee, DK
    Tsai, HB
    Tsai, RS
    [J]. POLYMER ENGINEERING AND SCIENCE, 2006, 46 (05) : 588 - 593