Precipitation kinetics of an aluminium alloy during Newtonian cooling simulated in a differential scanning calorimeter

被引：33
作者：
Milkereit, Benjamin [1 ,2 ]
Beck, Martin [1 ]
Reich, Michael [1 ]
Kessler, Olaf [1 ]
Schick, Christoph [2 ]
机构：
[1] Univ Rostock, Fac Mech Engn & Marine Technol, Chair Mat Sci, D-18051 Rostock, Germany
[2] Univ Rostock, Inst Phys, Polymer Phys Grp, D-18051 Rostock, Germany
来源：
THERMOCHIMICA ACTA | 2011年 / 522卷 / 1-2期
关键词：
Differential scanning calorimetry (DSC); Newtonian cooling; Stepwise linear cooling; Aluminium alloy EN AW-6082; Continuous cooling precipitation diagrams (CCP); Age hardening; LAW;
D O I：
10.1016/j.tca.2011.02.034
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The purpose of this report is to compare linear and non-linear cooling with respect to the precipitation behaviour of aluminium alloy EN AW-6082. Therefore an approximation of gas cooling by Newtonian law was performed. However, DSCs are typically designed for linear scanning. Hence a completely new method has been developed, to perform DSC-experiments during non-linear cooling. The temperature/time profile for two different types of DSCs was optimized avoiding overshoots at each change of cooling rate. Smooth curves were obtained by normalizing the measured heat flow rate by the actual heating rate yielding excess heat capacity as function of temperature. For the investigated aluminium alloy EN AW-6082 both kinds of cooling, linear and Newtonian, delivered comparable information about the characteristic precipitation reactions. Essential parts of the continuous cooling precipitation diagram could be recorded for both types of cooling. The intensities of the reactions, measured by the specific precipitation heat, were similar. (C) 2011 Elsevier B.V. All rights reserved.
引用
收藏
页码：86 / 95
页数：10
相关论文
共 26 条
  • [1] [Anonymous], 11 INT C AL ALL DTSC
  • [2] [Anonymous], 12 INT C AL ALL YOK
  • [3] [Anonymous], 1963, RECENT PROGR MICROCA
  • [4] [Anonymous], 2007, HTM-J HEAT TREAT MAT
  • [5] [Anonymous], 2003, DIFFERENTIAL SCANNIN, DOI DOI 10.1007/978-3-662-06710-9
  • [6] BUEVICH YA, 1982, HIGH TEMP+, V20, P902
  • [7] CALVET E, 1948, CR HEBD ACAD SCI, V226, P1702
  • [8] Some Observations on the Origins of Newton's Law of Cooling and Its Influences on Thermofluid Science
    Cheng, K. C.
    [J]. APPLIED MECHANICS REVIEWS, 2009, 62 (06) : 1 - 17
  • [9] Isaac Newton and heat transfer
    Cheng, KC
    Fujii, T
    [J]. HEAT TRANSFER ENGINEERING, 1998, 19 (04) : 9 - 21
  • [10] Influence of cooling rate on the precipitation microstructure in a medium strength Al-Zn-Mg alloy
    Deschamps, A.
    Texier, G.
    Ringeval, S.
    Delfaut-Durut, L.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 501 (1-2): : 133 - 139
123